Specification |
Used For: Specific;
Function: Post Amplifier, Amplifier Combined;
Dante Audio Channel: 2;
Network Port: RJ45;
Output Power: 2X50W at DC24V, 2X30W at Poe;
Input Sensitivity: Line Input: 400mv Network Input: 500mv;
Impedance: 4ohm;
Thd: 0.1%;
Snr: <83dB;
Line Input Channel: 2;
Line Output Channel: 2;
Input/Output Signal Level: 800mv;
|
Type: Professional Amplifier;
Usage: AV, KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC 220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: H;
Amplifier Protection: DC/Short/Temp/VHF/Limit/Softstar;
Input Connectors: 3 Pin-XLR/RCA/Trs;
Damping Factor: >400;
Input Sensitivity: 0.775V,1.0V,1.5V;
Indicators: Actect, Protect, Signal , Clip;
Customized: OEM. ODM;
|
Type: Professional Amplifier;
Usage: Hi-Fi, AV, KTV System;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC 220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: H;
Amplifier Protection: DC/Short/Temp/VHF/Limit/Softstar;
Input Connectors: 3 Pin-XLR/RCA/Trs;
Power Supply: 230V, 50/60Hz;
|
Type: Professional Amplifier;
Usage: Hi-Fi, AV, KTV System, Power Amplifier;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2.1;
Output Number: 4;
Voltage: AC 220V;
Element Number: Monoamplifier;
Conductive Mode: AB;
Speaker Output: 100V, 70V, 4-16ohms;
|
Type: Load Cell Signal Amplifier;
Usage: Signal Transmitter;
Used For: Load Cell;
Tube Type: Transistor Amplifier;
Function: Post Amplifier;
Sound Channel: Signal Amplifier;
Output Number: 1;
Voltage: AC 220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: D;
Theory: Resistance Sensor;
Aplication: Load Cell;
Linearity: 0.02%Fs;
Input Signal: 0~2mv/V;
|