Specification |
Standard: ASTM, GB;
Surface Treatment: Galvanized;
Technique: Cold Rolled;
Application: Roofing Plate;
Edge: Mill;
Stock: Stock;
MOQ: 50tons;
Standard Require: As1397:2011;
Zinc Coating: Z40 - Z250;
Yield Strength: Min.550n/mm2;
|
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Galvanized;
Technique: Hot Dipped;
Application: Container Plate;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.12mm-6.0mm;
Width: 600mm-1500mm;
Top Paint: 15+5;
Back Paint: 5-7;
Coil ID: 508/610mm;
Coil Weight: 3-8 Tons;
Zinc Coating: 30-600G/M2;
Gloss: 65%-80%;
Feedback: Within 24 Hours;
Hardness: G300- G550;
|
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Coated;
Technique: Cold Rolled;
Application: Insulation;
Edge: Mill;
Stock: Not Stock;
|
Standard: ASTM, JIS, GB, AISI, DIN, BS;
Surface Treatment: Coated;
Technique: Electrolytic;
Application: Mainly Used for Making Meta;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.13-3mm;
Width: T12-600mm;
Surface: Finish Tstone, Bright, Gold Lacquered;
Coil ID: 508mm or 610mm;
Grade: Tmr SPCC Dr8 Q195 SPTE;
Hardness: T2,T3,T4,T5,Dr8;
Coating: T5.6/5.6, 2.8/2.8 2.8/5.6;
Inspection: SGS,BV;
|
Standard: ASTM, JIS, AISI;
Surface Treatment: Galvanized;
Technique: Hot Dipped;
Application: Roofing;
Edge: Slit edge;
Stock: Stock;
Thickness: 0.12-6mm;
Width: 600-1500mm;
Coil ID: 508/610mm;
Coil Weight: 3-8 Tons;
Alume Zinc Coating: 50g-250g/Psm;
Gloss: 65%-80%;
Feedback: Within 24 Hours;
|