Specification |
Casting Method: Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Steel;
Casting Form Usage Count: Permanent;
Surface Treatment: Electroplating;
Surface Roughness: Ra6.3;
Coating: Syrup or pulp waste;
Machining Tolerance: +/-0.02mm;
Standard: BS;
Type: SUV;
Displacement: 1000-1600cc;
Braking System: Electromagnetic;
Drive: Rwd;
Gearbox: Automatic;
Conditon: New;
Steering: Left;
Body Type: Closed;
Fuel: Gasoline;
Color: Customized;
Control System: PLC;
|
Casting Method: Lost Wax Casting/Investment Casting/Sand Casting;
Casting Form Material: Metal;
Casting Metal: Stainless Steel, Aluminum, Ci etc.;
Casting Form Usage Count: Permanent;
Surface Treatment: Sand Blast/Powder Coating/Electroplating/Polishing;
Surface Roughness: Ra12.5;
Coating: Customized;
Machining Tolerance: +/-0.01mm;
Standard: AISI/ASME/ANSI/JIS/GB/DIN;
Software: PRO/E, Auto CAD, Solidwork, Caxa, Ug. etc.;
Certificate: TUV ISO9001 / Ts 16949;
Technical Support: Design Modification etc.;
Finishing: Anodizing, Coating etc.;
|
Casting Method: Lost Wax Casting/Investment Casting/Sand Casting;
Casting Form Material: Metal;
Casting Metal: Stainless Steel, Aluminum, Ci etc.;
Casting Form Usage Count: Permanent;
Surface Treatment: Sand Blast/Powder Coating/Electroplating/Polishing;
Surface Roughness: Ra12.5;
Coating: Customized;
Machining Tolerance: +/-0.01mm;
Standard: AISI/ASME/ANSI/JIS/GB/DIN;
Software: PRO/E, Auto CAD, Solidwork, Caxa, Ug. etc.;
Certificate: TUV ISO9001 / Ts 16949;
Technical Support: Design Modification etc.;
Finishing: Anodizing, Coating etc.;
|
Casting Method: Sand Casting;
Casting Form Material: Metal;
Casting Metal: Nonferrous Alloys;
Casting Form Usage Count: Permanent;
Surface Treatment: Polishing;
Surface Roughness: Ra0.05;
Coating: Zinc oxide;
Machining Tolerance: +/-0.01mm;
Standard: BS;
|
Casting Method: Special Casting;
Casting Form Material: Metal;
Casting Metal: Cast Steel;
Casting Form Usage Count: Permanent;
Surface Treatment: Polishing;
Surface Roughness: Ra0.05;
Coating: Water;
Machining Tolerance: +/-0.01mm;
|