Specification |
Color: Zinc Gray (Non-Adjustable Color);
Appearance: Liquid;
Main Raw Material: Epoxy;
Method: Spray/Brush/Roll;
Level: Primer;
Drying Method: Air Drying;
Substrate: Steel;
Components: Epoxy Resin + Zinc Powder, etc.;
Formation Mechanism: Conversion Type;
Zinc Content: 40%;
Executive Standard: Hg/T3668-2009;
Use Time: 4h (23ºC);
Flash Point: 27ºC;
Mixed Weight Ratio: a:B=10:1;
Curing Time: 20-30min (23ºC);
Storage Period: 1year;
Surface Drying: 23ºC, ≤30min;
Actual Drying: 23ºC, ≤24h;
Fully Cured: 23ºC, ≤7D;
Stoving: 80±2ºC, 60min;
Min Interval Time: 23ºC, 6h;
Max Interval Time: No Limit;
|
CAS No.: 9004-65-3;
Color: Sub-White, White;
Appearance: Powder;
Main Raw Material: Refined Cotton;
Method: Spray;
Level: Primer;
Drying Method: Drying;
Substrate: Ceramic;
Components: Film Forming Matter;
Formation Mechanism: Conversion Type;
Model No.: HPMC;
pH: 5-8;
Bulk Density: 0.40-0.70 g/cm3;
Ash Content: 3-10%;
Particle Size: 98.5% Passes Through 100 Mesh;
Viscosity: 60000-200000;
|
CAS No.: 9004-65-3;
Color: Sub-White, White;
Appearance: Powder;
Main Raw Material: Refined Cotton;
Method: Spray;
Level: Primer;
Drying Method: Drying;
Substrate: Ceramic;
Components: Film Forming Matter;
Formation Mechanism: Conversion Type;
Model No.: HPMC;
pH: 5-8;
Bulk Density: 0.40-0.70 g/cm3;
Ash Content: 3-10%;
Particle Size: 98.5% Passes Through 100 Mesh;
Viscosity: 60000-200000;
|
CAS No.: 9004-65-3;
Color: Sub-White, White;
Appearance: Powder;
Main Raw Material: Refined Cotton;
Method: Spray;
Level: Primer;
Drying Method: Drying;
Substrate: Ceramic;
Components: Film Forming Matter;
Formation Mechanism: Conversion Type;
Model No.: HPMC;
pH: 5-8;
Bulk Density: 0.40-0.70 g/cm3;
Ash Content: 3-10%;
Particle Size: 98.5% Passes Through 100 Mesh;
Viscosity: 60000-200000;
|
CAS No.: 9004-65-3;
Color: Sub-White, White;
Appearance: Powder;
Main Raw Material: Refined Cotton;
Method: Spray;
Level: Primer;
Drying Method: Drying;
Substrate: Ceramic;
Components: Film Forming Matter;
Formation Mechanism: Conversion Type;
Model No.: HPMC;
pH: 5-8;
Bulk Density: 0.40-0.70 g/cm3;
Ash Content: 3-10%;
Particle Size: 98.5% Passes Through 100 Mesh;
Viscosity: 60000-200000;
|