| Specification |
CAS No.: 63148-60-7;
EINECS: 224-221-9;
Bonding Function: Instant Adhesive;
Morphology: Paste;
Application: Automobile, Construction;
Material: Silicone;
Classification: Room Curing;
Main Agent Composition: Inorganic Adhesive Material;
Characteristic: Waterproof;
Promoter Composition: Curing Agent;
Composition: Inorganic Material;
Color: Any Color as Per Customer Demand;
Specific Gravity: 1.35+-0.01;
Meas.: 30*20*24cm for 300ml;
Hardness Shore a: 30-35;
Tack Free Time: 25-30 Minutes;
Viscosity: Non Sag;
Shelf Life: 12 Months;
Type: Neutral;
Feature: Single Component;
Modulus: High;
|
CAS No.: 7085-85-0;
Formula: C6h7no2;
EINECS: 230-391-5;
Bonding Function: High Temperature Resistant Adhesive;
Morphology: Solid-State;
Application: Woodworking, Footwear & Leather, Fiber & Garment, Mattress, Fabric, Foam etc.;
Material: EVA;
Classification: Hot Melt;
Main Agent Composition: Natural Polymer;
Characteristic: Weatherability;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: Yellow;
Appearance: Light Yellow Solid;
Smell: Slight Smell of Resin;
pH Value: 650-1000PA.S at 160 Degrees Centigrade;
Softening Point: 65-75 Degrees Centigrade;
Flash Point(Sealed): >392 Degree F, 200 Centigrade;
Recommended Application Temperation: 160-180 Centigrade;
|
CAS No.: 4253-34-3;
EINECS: 230-391-5;
Bonding Function: Structural Adhesive;
Morphology: Solid-State;
Application: Automobile, Construction, Packing, Window, Skylight, Family Decoration etc;
Material: Silicone;
Classification: Room Curing;
Main Agent Composition: Acidity Silicone;
Characteristic: Waterproof;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: Transparent, White, Black and Gray.;
Total Cured Time: 24 Hours;
Skin Cure Time: 5-20 Minutes;
Tack-Free Time: 15-30 Minutes;
Gravity: 0.98-1.1 G/Cubic Centimetre;
Sag/Slump: <=1 mm;
Extrudability: >=200 Ml/Min;
Application Temp: +5-+40 Degrees Celsius;
|
CAS No.: 7085-85-0;
Formula: C3h8n2o;
EINECS: 231-545-4;
Bonding Function: High Temperature Resistant Adhesive;
Morphology: Solid-State;
Application: Woodworking, Footwear & Leather, Fiber & Garment, Sofa, Mattress, Fabric etc.;
Material: Apao;
Classification: Hot Melt;
Main Agent Composition: Natural Polymer;
Characteristic: Weatherability;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: White;
Appearance: Milky White Solid;
Smell: Good Smell;
Softening Point: 120-140 Centigrade;
Melt Viscosity: 1600-3000PA.S at 70 Centigrade;
Flash Point: >392 Degrees F , 200 Centigrade;
Recommended Temperature: 165-180 Centigrade;
Shelf Life: 2 Years;
Relative Density: 0.88-0.96;
|
Bonding Function: Pressure sensitive Adhesive;
Morphology: Water Emulsion;
Application: Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, BOPP Tape;
Material: Acrylic;
Classification: Pressure-Sensitive;
Main Agent Composition: Natural Polymer;
Characteristic: Waterproof;
Promoter Composition: Solvent;
Composition: Organic Material;
Color: White;
Polymer Type: Acrylic Copolymer;
Appearance: Pure White;
Holding Force: >=24 Hours;
Total Solid Content by Wt: 54.0%-56.0%;
pH Value at 25 Degrees Celsius: 6.1-9.0;
Viscosity(Mps/S): <=80;
Initial Adhesivion Force(GB): >=23#;
Coating Backer: BOPP, PVC, Pet Film, Paper, Masking Tape etc;
|
