Specification |
CAS No.: 9004-65-3;
Formula: C18h38o14;
EINECS: 220-971-6;
Appearance: Powder;
Usage: Coating Auxiliary Agents, Cement Mortar, Tile Adhesive;
Color: White;
Product Name: Hydroxypropyl Methyl Cellulose/ HPMC;
Application: Cement Mortar, Tile Adhesive;
Application2: Putty Powder, Gypsum, Paint;
Function: Thicken and Water Retain Agent;
Raw Material: Refined Cotton;
Density: 0.35-0.55g/cm3;
Grade: Inductrial Grade;
Application3: Detergent;
Transmittance: 85%;
Whiteness: 78%;
Transport: by Sea, by Express, by Train, by Trucker;
|
Appearance: Liquid;
Usage: Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Leather Auxiliary Agents;
Color: Light Yellow;
Specific Gravity (25 ºC): 1.00~1.01;
Viscosity (Cst 25°c): 1000~1800;
Refractive Index(25°c): 1.460~1.464;
Typical Application 1: Plastic Components Release Agent;
Typical Application 2: Rubber Components Release Agent;
Typical Application 3: Rubber Parts' External Lubricant in Mechanical;
Typical Application 4: Wetting and Dispersing Agent for Pigments& Fillers;
Typical Application 5: High Temperature Coating Leveling Agent;
Storage: in Closed Containers;
Package: 200L or IBC Drums;
Shelf Life: 36 Months;
|
CAS No.: 82628-87-3;
Appearance: Liquid;
Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals;
Color: White;
Specific Gravity: 0.98;
Active Content: 60%;
pH: 6-8;
Freeze Thaw Stability: 5 Cycles;
Emulsion Stability: up to 50°c;
Dilution Stability: up to 2% in Water;
Feature 1: Nonionic Emulsion;
Feature 2: General Purpose Release Agent;
Feature 3: Provide Gloss and Water Repellency;
Particle Size: 90 ~ 800;
General Use 1: as Release/Lubricant;
General Use 2: as Fabric Finish Agent;
Typical Application 4: Mold Release of Rubber/Plastic Parts;
Typical Application 5: as Ingredient for Car/Furniture Polish;
Typical Application 6: Textile Lubricant;
|
Appearance: Liquid;
Usage: Silicone Water Repellent;
Color: White;
Viscosity (Cst, 25ºC): Approx. 12;
Active Content: 40%;
Density: 0.95g/cm3;
pH: Approx. 8;
Key Feature 1: Good Depth of Penetration;
Key Feature 2: Resistance to Alkalis;
Key Feature 3: Rapid Development of Water Repellency;
Key Feature 4: Provide Good Adhesoin for Paints;
Key Feature 5: Water Based and Enviromentally Friendly;
Key Feature 6: Stable in Storage, Even When Duilted;
Typical Application 1: for Absorbent Mineral Substrates Waterproof;
Typical Application 2: Good for Inplant Impregnation of Building Material;
Typical Application 3: Water-Repellent Primer for Emulsion Paint/Plaster;
Typical Application 4: as Silicone Resin Emulsion Paint Waterproof Primer;
Typical Application 5: as Silicone Resin Plaster Waterproof Primer;
|
Appearance: Liquid;
Usage: Coating Auxiliary Agents, Textile Auxiliary Agents, Leather Auxiliary Agents, Silicone Waterproof;
Color: Milky White;
Active Content: (40-60)%;
Density: 1.00 ± 0.05;
pH: 6 ~8;
Stability (3000r/Min): 15min Non-Stratifie;
Key Feature 1: High Spreading and Wetting Capabilities;
Key Feature 2: Permeability to Gas and Water Vapor;
Key Feature 3: Resistance to Ultraviolet Light (UV), Heat;
Key Feature 4: Resistance to Oxidative Degeneration;
Key Feature 5: Durability and Mechanical and Chemical Adhesion;
Typical Application 1: Waterproof Coating for Roof Masonry Clay Products;
Typical Application 2: Waterproof Coating for Timber and etc;
Typical Application 3: Waterproof Elastomeric Coatings for Industrial;
Typical Application 4: Waterproof Elastomeric Coating for Fashion Textile;
Typical Application 5: Additives to Wash-off Resistance of Beauty Product;
Typical Application 6: Additives to Wash-off Resistance of Personal Care;
|