Inertial Measurement Unit

3,090 results for Inertial Measurement Unit

Three · IP67 · CE

Honeywell Hg4930c Mems Inertial Measurement Unit for Precision Navigation

US$ 2100-2300 / Piece
1 Piece  (MOQ)
Product Description Product overview The MEMS Inertial Measurement Unit (IMU) consists of three-axis gyroscope, three-axis accelerometer, temperature sensor, signal processing board, structure and necessary software, and is used for measuring the three-axis angular rate, three-axis acceleration and

IP67 · Non-Customized · Digital Output

Mems Inertial Measurement Unit with High Bandwidth up to 200Hz and Compact&Light Wight

1 Piece  (MOQ)
IMU488M High Performance 10DoF MEMS Inertial Measurement Unit Main Features - Precision 10DoF IMU, Pin to Pin Replace ADIS16488 - Range (Typical): Gyro ±450°/s, Acc ±16g - Bias Instability: Gyro: 1°/h, Acc 30μg - Full Temperature Range Accuracy Assured - High Ban

IP67 · Non-Customized · Digital Output

ODM Supported Inertial Measurement Unit for Antenna Pointing

1 Piece  (MOQ)
IMU80 6DoF Mini IMU Main Features - High Precision 6 DoF Mini IMU with Full Calibration - Fully Similar as ADIS16460, Better Performance - Range (Typical) : Gyro ±400°/s, Acc ±8g - Bias Instability (Allan): Gyro 3°/h, Acc 50μg - Interface: SPI (2000Hz), UART (200Hz

IP67 · Non-Customized · Digital Output

Hot Selling and Competitive Pirce Mems 10-Axis Inertial Measurement Unit (IMU)

1 Piece  (MOQ)
IMU485 10DoF MEMS IMU Main Features - Precision 10DoF IMU, Pin to Pin Replace ADIS16485 - Range (Typical): Gyro ±450°/s, Acc ±16g - Bias Instability (Allan): Gyro: 2°/h, Acc 35μg - Full Temperature Range Accuracy Assured - High Bandwidth (Typical): 200Hz - UART an

0.1G · IP67 · CE

Inertial Measurement Unit for Motion Orientation and Positioning of Unmanned Vehicle

US$ 4648-5577 / Piece
1 Piece  (MOQ)
Specification Parameter U7000-A U7000-B Unit Gyroscope Measurement range ±400 ±400 °/s Full temperature zero bias stability (10s, 1σ) ≤10 ≤2 °/h Zero bias stability (10s, 1σ) ≤1 ≤0.3 °/h Zero bias stability (Allan) ≤0.1 ≤0.07 °/h Zero bias repeatability (1σ) ≤1 ≤0.3 °/h Angle random walk ≤0.05 ≤0.02

Servo · Three · CE

High Performance Imu Inertial Measurement Unit for Oil Exploration

US$ 2400-2500 / pieces
5 pieces  (MOQ)
Product Description The 16488HA inertial measurement unit is a complete inertial system with a built-in three-axis gyroscope and a three-axis accelerometer, which is used to measure the three-axis angular rate, acceleration and other parameters of the carrier, and output the data after error compens

IP67 · Non-Customized · Digital Output

Robust Precision 10dof Inertial Measurement Unit

1 Piece  (MOQ)
IMU5000 Robust Precision 10DoF Inertial Measurement Unit Main Features - Robust Precision 10DoF Inertial Measurement Unit - Range (Typical): Gyro ±4000°/s, Acc ±30g (X,Y), ±150g (Z) - Bias Instability: Gyro: 1°/h, Acc 30μg (X,Y: ±30g), 120&m

Servo · Customized · 0.1G

Low Cost Mems Inertial Measurement Unit Cost-Effective

US$ 1983-1987 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit The IMU200B is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. IMU200B has high reliability and strong environmental

IP67 · Non-Customized · Digital Output

High Performance Inertial Measurement Unit

1 Piece  (MOQ)
IMU90 High Precision 6DoF Mini IMU Main Features - High Precision 6 DoF Mini IMU with Full Calibration - Range (Typical) : Gyro ±500°/s, Acc ±16g - Bias Instability (Allan): Gyro 1.5°/h, Acc 35μg - Data Output Rate:UART 1000Hz, SPI up to 1000Hz - Power Supply: 3.3

IP67 · Non-Customized · Digital Output

Inertial Measurement Unit (IMU) with High Performance Better Than Adis16485

1 Piece  (MOQ)
IMU485 10DoF MEMS IMU Main Features - Precision 10DoF IMU, Pin to Pin Replace ADIS16485 - Range (Typical): Gyro ±450°/s, Acc ±16g - Bias Instability (Allan): Gyro: 2°/h, Acc 35μg - Full Temperature Range Accuracy Assured - High Bandwidth (Typical): 200Hz - UART an
  • QWhat is an Inertial Measurement Unit and how does it work in electronics applications?

    An Inertial Measurement Unit is a device that measures and detects acceleration, rotation, and tilt. In electronics, it provides critical data for navigation, motion tracking, and stabilization. Partnering with a reputable manufacturer allows you access to the latest technologies and accurate sensing capabilities.

  • QHow can I verify the quality and certification of Inertial Measurement Unit suppliers in China?

    To ensure quality and certification of Inertial Measurement Unit suppliers in China, you can request documentation, such as ISO certificates or product testing reports. It is advisable to visit the supplier's manufacturing facilities or request samples for validation.

  • QWhat are the benefits of sourcing Inertial Measurement Units in bulk for electronic applications?

    Purchasing Inertial Measurement Units in bulk for electronic applications allows for cost savings, economies of scale, and ensures product availability for your ongoing projects. Bulk orders provide opportunities for customization, packaging options, and prompt delivery, allowing you to meet your electronic design requirements efficiently.

IP67 · Non-Customized · Digital Output

High Vibration and Shock Resistant (up to 10000g) Inertial Measurement Unit

1 Piece  (MOQ)
IMU188 Miniature 6DoF MEMS IMU Main Features - Precision 6 DoF IMU with High G capable to 10000g - Dynamic Range: Gyro ±450°/s, Acc ±16g - Bias Instability (Allan): Gyro: 1.2°/h, Acc 50μg - Full Temperature Range Accuracy Assured - High Bandwidth, RS422, up to 2000

IP67 · Non-Customized · Digital Output

High Accuracy Inertial Measurement Unit for Unmanned Vehicle

1 Piece  (MOQ)
IMU286 Automotive Grade 6DoF MEMS IMU Main Features - Automotive Grade 6DoF IMU Sensor, Easy to Integrate - Strictly Factory Calibrated at Full Temperature - Pass 2000km All-Terrain Vehicles Tests - Range (Typical): Gyro ±450°/s, Acc ±16g - Bias Instability (Allan): Gyro: 1

IP67 · Non-Customized · Digital Output

China Customized High Precision and Low Cost Inertial Measurement Unit for Industrial Robotics

1 Piece  (MOQ)
IMU388 Tactical 6DoF MEMS IMU Main Features - High Precision Tactical 6DoF MEMS IMU Sensor - Range (Typical): Gyro ±500°/s, Acc ±40g - Bias Instability (Allan): Gyro: 0.6°/h, Acc 30μg - Strict Factory Calibration, Full Temp. Compensation - High Bandwidth (Typical

Capacitive · Customized · 0.1G

Compact Size Inertial Measurement Unit Based on Mems Technology

US$ 2390-2397 / Piece
1 Piece  (MOQ)
MEMS Inertial Measurement Unit The 16488HA inertial measurement unit is a complete inertial system with a built-in three-axis gyroscope and a three-axis accelerometer, which is used to measure the three-axis angular rate, acceleration and other parameters of the carrier, and output the data after er

Servo · Customized · 0.1G

Highly Integrated Inertial Measurement Unit on Mems Technology

US$ 1683-1687 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit IMU103 is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), which contains high-performance MEMS gyroscope and MEMS accelerometer, and outputs three angular velocities and three accelerations. The IMU 103 has high reliability and strong en

Servo · Customized · 0.1G

Inertial Measurement Unit for Autonomous Motion Robot

US$ 1983-1987 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit The IMU200B is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. IMU200B has high reliability and strong environmental

Three · IP67 · CE

Cost-Effective Imu 200$ Inertial Measurement Unit for Driverless Vehicles

US$ 180-200 / Piece
1 Piece  (MOQ)
Product Description IMU115 is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. Product features Three-axis digital gyroscope: ± 2

IP67 · Non-Customized · Digital Output

China Low Cost High Performance Tactical Mems Inertial Measurement Unit (IMU) Better Than Adis16488

1 Piece  (MOQ)
IMU488M High Performance 10DoF MEMS Inertial Measurement Unit Main Features - Precision 10DoF IMU, Pin to Pin Replace ADIS16488 - Range (Typical): Gyro ±450°/s, Acc ±16g - Bias Instability: Gyro: 1°/h, Acc 30μg - Full Temperature Range Accuracy Assured - High Ban

IP67 · Non-Customized · Digital Output

Ultra-Light Weight 6dof Inertial Measurement Unit Less Than 22 G (including cable)

US$ 430-500 / Piece
1 Piece  (MOQ)
IMU188 Miniature 6DoF MEMS IMU Main Features - Precision 6 DoF IMU with High G capable to 10000g - Dynamic Range: Gyro ±450°/s, Acc ±16g - Bias Instability (Allan): Gyro: 1.2°/h, Acc 50μg - Full Temperature Range Accuracy Assured - High Bandwidth, RS422, up to 2000

IP67 · Non-Customized · Digital Output

Ideal Inertial Measurement Unit for Airborne Optoelectronic Pod and Target Drone

1 Piece  (MOQ)
IMU388 Tactical 6DoF MEMS IMU Main Features - High Precision Tactical 6DoF MEMS IMU Sensor - Range (Typical): Gyro ±500°/s, Acc ±40g - Bias Instability (Allan): Gyro: 0.6°/h, Acc 30μg - Strict Factory Calibration, Full Temp. Compensation - High Bandwidth (Typical

Three · IP67 · CE

Honeywell Hg4930c Inertial Measurement Unit for Motion Tracking

US$ 2100-2300 / Piece
1 Piece  (MOQ)
Product Description Product overview The MEMS Inertial Measurement Unit (IMU) consists of three-axis gyroscope, three-axis accelerometer, temperature sensor, signal processing board, structure and necessary software, and is used for measuring the three-axis angular rate, three-axis acceleration and

IP67 · Non-Customized · Digital Output

Imu388 High-Accuracy Inertial Measurement Unit

US$ 920-1000 / Piece
1 Piece  (MOQ)
IMU388 Tactical 6DoF MEMS IMU Main Features - High Precision Tactical 6DoF MEMS IMU Sensor - Range (Typical): Gyro ±500°/s, Acc ±40g - Bias Instability (Allan): Gyro: 0.6°/h, Acc 30μg - Strict Factory Calibration, Full Temp. Compensation - High Bandwidth (Typical

Servo · Customized · 0.1G

Mems Technology Inertial Measurement Unit

US$ 1983-1987 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit The IMU200B is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. IMU200B has high reliability and strong environmental

Servo · Customized · 0.1G

Affordable Inertial Measurement Unit for Commercial Grade Devices

US$ 1983-1987 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit IMU201 is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), which contains high-performance MEMS gyroscope and MEMS accelerometer, and outputs three angular velocities and three accelerations. IMU201 has high reliability and strong environ

Servo · Customized · 0.1G

Low Angular Random Walk Mems Inertial Measurement Unit

US$ 1783-1787 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit The MEMS inertial measurement unit consists of three-axis gyroscope, three-axis acceleration meter, three-axis inclination angle,temperature sensor, signal processing board, structure and necessary software, and is used for measuring the three-axis angular rate, the th

Miniature Inertial Measurement Unit with Nonlinear Compensation for Uav

US$ 98 / Piece
1 Piece  (MOQ)
Specification Main parameter Indication Unit Gyroscope Measurement range (can be customized) ±125/±250/±500/±1000 °/s Angle random walk 0.12 °/√h Linear scale factor 0.1 %FS Zero bias stability (In-Run) 7 °/h (Allan) Zero bias repeatability (In-Run) 7 °/h Accelerometer Measurement range (can be cust

Three · IP67 · CE

Honeywell Stim300 Tactical Imu Inertial Measurement Unit for Oil & Gas Drilling

US$ 2100-2300 / Piece
1 Piece  (MOQ)
Product Description Product overview The IMU6 inertial measurement unit consists of three-axis gyroscope, three-axis accelerometer, three-axis tilt angle (without this sensor by default), temperature sensor, signal processing board, structure and necessary software, and is used to measure the three-

Servo · Customized · 0.1G

Mems Inertial Measurement Unit for Robot Arm Motion Tracking

US$ 1883-1887 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit IMU115 is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. The IMU 115 has high reliability and strong environmenta

Servo · Customized · 0.1G

Mems Inertial Measurement Unit with Digital Output

US$ 1583-1587 / pieces
1 pieces  (MOQ)
MEMS Inertial Measurement Unit The MEMS Inertial Measurement Unit (IMU) consists of three-axis gyroscope, three-axis accelerometer, temperature sensor, signal processing board, structure and necessary software, and is used for measuring the three-axis angular rate, three-axis acceleration and three-

IP67 · Non-Customized · Digital Output

High Precision Inertial Measurement Unit (IMU) with Low Bias Stability

1 Piece  (MOQ)
IMU588 Precision 6DoF MEMS Inertial Measurement Unit Main Features - Precision 6DoF MEMS Inertial Measurement Unit - Range (Typical): Gyro ±450°/s, Acc ±16g (Z axis ±50g) - Bias Instability: Gyro: 1°/h, Acc 30μg (±16g) - Full Temperature Range Accuracy
Haven't found what you want?

Easy Sourcing

Post sourcing requests and get quotations quickly.

Product Alert

Subscribe to product alert and stay updated to what's new and popular on the market.