Servo Web Guiding System with CCD Sensor

GL-1000 Servo Web Guide Controller Function:

1. CPU adopts 32-bit dual-core (FPGA+ARM), working frequency up to 168MHz

2. The motor drive adopts FPGA drive (no need for external capacitor resistance commutation, no need to replace       carbon brush, high performance far exceeding traditional DC motor)

3.16-bit imported high-precision AD sampling chip with 1us sampling time and the sensor signal is much more stable.

4. 260,000-color TFT LCD Screen

5. Graphical multi-level menu for convenient operation

6. Using the fuzzy adaptive PID Control and any material is adaptive.

7. The universal sensor interface can be connected to single/dual photoelectric eyes, ultrasonic sensors, and CCD  sensors.

8. Electronic commutation, maintenance-free, high reliability, high safety without sparks when commutation.

9. With metal shell, stronger anti-interference

SL-150B Servo Web Guide Actuator Description:

    Using imported stepping motor, precision grinding ball screw, life-time free  maintenance. According to different needs,     equipped with different travel, installation and response speed. Available to adjust from outside with left and right limit switch.

    Adopts 1000 wire incremental encoder, the precision is greatly improved while the the driving speed is quicker. Real-time     feedback of screw position, without any back switch or limit switch.One key to identify mechanical stroke.

1. Adopts Japan's Sanyo electric motor as the actuator, without carbon brush

2. Fully reliable and long service life, truly realize long-term maintenance-free during use

3. It has the characteristics of energy-saving and environmental-friendly,

4. Adopting Taiwan precision ball screw with the smallest gap

5. Clearance and durability, so that the actuator has no backlash error.

6. Choosing from75-300mm stroke, 0.5T-10T thrust weight

7. Installation method has direct connection type and L type

SG-200 CCD image sensor features:

1. No need for polarity conversion.

When the coil baseline and line asymptotically or the left and right edges are reversed, there is no need to switch  the polarity of the control  output.

2. No need to re-adjust the gain.

The deviation of the edge from the output voltage is not affected by the width or color of the line. Therefore, once the gain of the controller is set during the test run, there is no need to re-adjust the gain.

3. Position signal hold function.

When a line leaves the field of view and when it returns, the position signal generated immediately before the line leaves the field of view is maintained and output. Therefore, when the web bending speed is fast and the line (edge)  will be out of the field of view, the tracking operation will be performed.

4. The line (edge) position is displayed by LED.

The control action, even if the integral action is standard, can also be combined with the position transmitter to perform proportional action. The most suitable control action can be selected according to the machine used.

5. When the detected edge is in the center of the field of view, an LED indicator lights up.

When the device is connected to a controller with a drive lock input, in the case of intermittent lines, when an interruption is detected in the line, the drive is locked and the tracking operation is stopped until the next line appears.