Basic Info.
Automatic Grade
Automatic
Cylindrical Grinder Type
Honing Machine
Certification
CE, ISO 9001
Product Description
Machine Operation: Deep hole Honing controlled by PLC
Machine Specifications:
deep hole honing machine | Technical Parameters |
Deep hole honing diameter range | 30mm-400mm |
Maximum honing diameter | 400mm |
Maximum honing length | 3000mm |
Workpiece clamping diameter range | 50mm-500mm |
Height from machine's main shaft center line to workpiece's machine base flat guide rail | 270mm |
Spindle speed range | 15-250r/min |
Main motor power | 11kw(inverter motor and infinite speed variation) |
Honing head expanding hydraulic system oil pump motor power | 1.1kw |
Honing head expand hydraulic system oil pump flow | 12.5L/min |
Coolant pump flow | 100L/Min |
Honing head hydraulic system Max. Tension force | 4Mpa |
Coolant chamber volume | 950L |
Coolant pump motor power | 1.5KW |
Coolant mode(for honing head) | Combined outside and inside oil feeding |
Reciprocating motor power | 7.5Kw(servo motor and infinite speed variation) |
Honing oil feeding(outside and inside combine mode) advantages:
Traditional honing oil delivery is outside oil spary(honing oil spray to the innder workpiece through oil hose).Honing oil go inside through honing bar,which can make the coolant oil form into higher pressure,which will have big force to wash the honing dirties.Inside honing oil feeding can make up the long workpiece honing defect. When honing long workpiece(more than 1.5m),only use outside honing oil delivery,which could not cool and wash the honing head,but by inside honing oil delivery,which can cool and wash the honing head in time.
Machine bed base:
Machine bed base | Square steel welding--tempering-ageing treatment--ball blast treatment--machining process(planing,grinding,milling) |
Guide rail | Round linear guide rail,driven by rack and pinion |
Carrier | Carrier is mounted on round linear guide rail. |
Workpiece:
Workpiece clamping mode | Chains clamping(tighten),screw drive chains to fasten the workpiece |
Workpiece location | V rest and U wheel(depends on the workpiece size), Centering the workpiece by adjusting the screw. |
Workpiece honing oil infeeding | Honing bar (inside honing oil)delivery and outside honing oil through oil hose. |
Honing head:
Honing head | Installed on the honing bar,and the honing bar is driven to rotate and do axial infeeding by honing box |
Honiing head drive | Driven though honing box spindle rotation,and do axial motion |
Honing head tension/expanding | By hydraulic (1.1KW) |
Honing box:
Honing box | Mounted on carrier |
Honing box motor | 11KW,inverter control,infinite speed variation) |
Honing box speed range | 15-250r/min |
Coolant system:
Coolant tank | Floor mounted |
Coolant pump flow | 100L/Min |
Tension hydraulic motor power | 1.1KW |
Coolant volume | 950L |
Coolant pump motor power | 1.5kw |
Coolant centrifugal pump (inside oil feeding) | Multistage type(inside oil feeding 1.5kw) |
Machine coolant pump (outside oil feeding) | AB-200(0.75kw) |
Paper filtering and magnet filtering | 20um level of purity |
Honing oil | HY-80(Chinese brand),dynamic viscosity 3-6 cm2 per seconds,flash point:130 ,frozen point:-30census. |
Lubrication system:
Lubrication system | Honing box is self lubrication system(fill in lubrication oil into honing box,lubrication all parts during gear rotating), Round linear guide rail lubrication is intermittent lubrication(Single shot type centralized lubrication system) |
Lubrication system pressure | 0.8MPA |
Lubrication tank capacity | 1.5L |
Oil level sensor | Low level sensing-light alarm and bell alarm |
Lubrication oil type | Mineral base oil |
Electrical system:
Machine system control | PLC(Delta brand) |
Adjustment of stroke position | Set position on PLC pannel |
Operation console | Touch screen colour HMI |
Electrical cabinet | Inside the machine base(save land) |
Air circulation | Exhaust fan(two sets) |
Supply voltage | 3 phase,380V, 50HZ(to be confirmed by customer) |
Total connected power | 18.5kw |
Contact person:
Sunny:
Phone number: + 86 15153489925
Address:
Guangchuan Road, Dezhou, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Chemicals, Construction & Decoration, Electrical & Electronics, Furniture, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Dezhou Guanlu Precision Machinery Co., Ltd. Located in Dezhou, Shandong, is a professional manufacturer of deep hole drilling machine (gun drilling machine), deep hole boring machine, deep hole drilling and boring machine, deep hole honing machine, deep hole skiving roller and burnishing machine as well as their relative accessories, such as gun driller sharpen device, BTA deep hole indexable drill head, deep hole boring head, deep hole pressing head and so on. Our company can also offer the customized deep hole machine solutions according to the customers′ requirement.
Welcome to visit our factory. And thanks for choosing our deep hole machinery