Basic Info.
Product Description
BNT-9000A is a multi-interface comprehensive test instrument that integrates 10/100/1000M, 10G Ethernet optical and electrical ports, E1 interface, PRI call interface, OTDR, V.35/V.24 interface, and optical power meter and red light source interface, which can support RFC2544 test, E1/V.35 physical layer, link layer, IP layer test, frame relay test on the Ethernet interface; support network topology discovery, support OTDR, optical power and red light source, etc. Test functionality. Suitable for the opening and maintenance of dedicated lines for large customers.
dedicated lines Hardware Interface1. Ethernet interface: dual optical ports 100/1000 , dual electrical ports 10/100/1000M/10G Ethernet ports2. DATACOM data interface: 1 V.35 /V.24 data test function3. 75 ohm unbalanced E1 interface: E1 link, compliant with G.703 ( E1 )4. 120 ohm balanced E1 interface: E1 link, compliant with G.703 ( E1 )5. Optical power interface: independent optical power meter interface6. Red light source interface: independent red light source interface7. OTDR interface: independent OTDR interface8. Management network port: used for remote control and data export9. USB/TF card interface: data storage and exportEthernet interface function1. Contains two independent Ethernet interfaces, which can be configured as optical or electrical ports.2. Electrical port: 10/100/1000M adaptive3. Optical port: 1000M/100M/10G configurable4. Configurable MAC address5. Support VLAN , VLAN number is configurable6. Provide Ethernet link self-loop IP PING7. Statistics of packets sent, received, error packets, packet loss and packet loss rate8. Fixed speed PING , 1, 10, 100, 200, 500 frames per second9. Long packet PING : Ultra-long packet PING test in IP fragmentation mode , the IP payload length can exceed 65,000 bytes10. Bandwidth PING : PING test of specified bandwidth , bandwidth can range from 1M to 10G , single frame size can be up to 10000 bytes11. IP and VLAN discovery: Capture and parse packets from ports to parse out VLAN numbers and IP addresses12.Port loopback: support 1~4 layer loopback, respond to ARP request, respond to ICMP request; for IP packets of specific ports , MAC address source and destination exchange, IP address source and destination exchange13. TCP delay test: TCPING test can test the TCP response speed of the specified server port, including: SYN-ACK delay and FIN-ACK delay, accurate to microseconds14.RFC2544 protocol: support UDP protocol and ICMP protocol15.RFC2544 test frame length: supports standard frame lengths of 64 , 128 , 256 , 512 , 1024 , 1518 , and additionally supports JAMBO jumbo frames of 4000 , 8000 , 10000 bytes16.RFC2544 packet loss rate, throughput rate, delay, back-to-back: support standard frames, JAMBO frames up to 10,000 bytes17. DHCP automatically obtains IP address; illegal DHCP service detection18.ARP scanning; IP conflict detection19. Route tracking: Use the instrument to ping the remote IP device and display the IP list of all routers on the path.20. Port positioning: Make the switch port indicator light flash, while other switch port indicators are not affected21. Aggregation port test: Aggregation port test: One-to-many networking of dedicated circuit aggregation port (aggregation port VLAN division), a . The aggregation port router does not perform any operation, and the aggregation port router is directly tested from the remote end of the branch to test the packet loss rate, throughput rate, delay, back-to-back and other parameters, and obtain the accurate bandwidth. b . The branch point is looped, and the packet loss rate, throughput rate, delay, back-to-back and other parameters are tested from the aggregation port side to each branch point, and the accurate bandwidth is obtained. Both a and b scenarios are completed on a single machine.22. Loop detection: Instantly detect whether the remote end of the circuit currently connected to the instrument has looped, and display it intuitively23.Bandwidth flow monitoring through mode24. Broadcast Storm MonitoringE1 Interface Function1. 75 ohm E1 unbalanced BNC interface2. 120 ohm E1 balanced RJ48 interface3. Loop detection: Instantly detect whether the remote end of the circuit currently connected to the instrument has looped, and display it intuitively4. Clock source, internal clock: 2.048MHz ± 5ppm , receiving: lock the receiving signal clock5. Line coding: HDB3 and AMI , Pulse waveform: compliant with ITU-T G.7036. Frame format: non-frame , PCM31, PCM31C, PCM30, PCM30C7. Clock selection: lock the receiving clock, or use the internal clock8. Nx64k configuration: N ( contiguous ) and M ( non-contiguous ) x64Kbps (N&M=1 to 31)9. Automatically detect frame format and CRC10. Automatically detect Nx64k time slot configuration, and can detect occupied time slot numbers and unoccupied time slot numbers11. Error code test: code type 2e7, 2e9, 2e11, 2e15, 2e21, all 1 , 0/1 alternating12.E1 receiving frequency measurement13.Code/BPV errors (error counts and ratios)14. Frame errors ( FAS , MFAS and CRC-4 error counts and error ratios)15.LOS, Sync loss, LOF , AIS , FAS , RAI and MFAS second counts16.G.821 analysis, G.826 , M.2100/550 measurement, E-bit error count and ratio17. Error insertion: bit error, line error18.Support IP protocol and PING test19.WAN port supports PPP , HDLC , FrameRely and other routing protocols20.Can establish connection with local or remote router WAN port21. Automatically obtain the IP address of the WAN port of the peer router22. Fast traffic PING test23. In case of circuit loopback, perform loopback quick PING test24.Frame Relay Test UNI DTE/DCE Frame Relay Monitoring and Simulated Customer End ( CPE ) Test25. Compliance with standards : ITU Q.933, ANSI T1.618/T1.617 CISCO LMI, LMI analysis, PVC status, DLCI statistics ( providing 32 DLCIs at the same time ) , CIR service quality test.V.35/V.24 interface functional requirements1. Interface: V.35&V.24 , DCE/DTE , synchronous access mode2. Error code test: code type 2e7, 2e9, 2e11, 2e15, 2e21, all 1 , 0/1 alternating3. BERT error characteristic test complies with G.821 analysis4. Support IP protocol and PING test5. WAN port supports PPP , HDLC , FrameRely and other routing protocols6. Can establish connection with local or remote router WAN port7. Automatically obtain the IP address of the peer router WAN port8. Fast traffic PING test9. In case of circuit loopback, perform loopback quick PING test10.Frame relay test UNI DTE/DCE frame relay monitoring and simulated user end ( CPE ) test11. Loop detection: Instantly detect whether the remote end of the circuit currently connected to the instrument has looped, and display it intuitivelyOptical power meter interface function1. Connector type FC/SC/ST2. Calibration wavelength: 850/980/1300/1310/1490/15503. Probe type: InGaAs4. Power measurement range: -70dBm~+6dBm5. Uncertainty: +-0.25dB6. Linearity: 0.03dB7. Display resolution: 0.01dBOTDR function module function1. Measurement wavelength 1550nm±10nm2. Laser type: Pulsed FP laser3. Dynamic 20dB4. Measuring range: 500m/1Km/2.5Km/5Km/10Km/20Km/40Km5. Pulse width 10ns/25ns/50ns/100ns/250ns/500ns/1us/2.5us/5us/10us6. Blind zone: event blind zone <4m , attenuation blind zone <10mRed light source interface function1. Connector type: FC/SC/ST2. Working wavelength: 650nm3. Fiber output power: >10mW4. Flashing frequency: always on /2HzManagement Features1. Contains an Ethernet interface for management and can be used to export test results2. Discover and display the LAN topology diagram; add multiple VLANs .3. Support USB interface and USB flash drive4. Built-in 8G TF cardOther general1. Small size, easy to hold with one hand, weighs about 1 kg2. Charger: 5V~20V charging, supports direct car charging3. High resolution 7 -inch color LCD display with LED backlight4. Internal battery: polymer lithium battery 12000 mAh, 3.7V5. Battery operation time: 6 hours; Charging time: 6 hours6. Instrument operation interface is displayed in Chinese
Address:
2401, Block B, Smart Home, No. 76, Baohe Avenue, Baolong Community, Baolong Street, Longgang District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9000
Company Introduction:
Shenzhen Zhepu Technology Development Co., Ltd. is mainly engaged in the R & D, production and sales of communication test instruments, and acts as an agent for international advanced communication instruments. At present, we have established a nationwide service and marketing network, which can provide customers with unified and perfect pre-sale, in sale and after-sale services and technical support. In order to meet the multi-level needs of different users, the company has taken a variety of effective measures to ensure the quality of products and services, to make a rapid response to customer needs, and gradually become a reliable equipment supplier for customers.
Zhepu technology′s main products include VIP support test instrument series, wireless test instrument series, optical transmission test instrument series, other instrument and tool series. Its self-produced products have passed the appraisal of national authorized professional inspection institutions.
){kind=link}