Basic Info.
Product Description
ZLAC8015--low voltage servo driver
Features
New 32-bit DSP control technology
Support multiple control methods and multiple input methods
High dynamic performance, large peak torque, smooth running at low speed
Stable performance and extremely low repair rate
High performance, low price and good stability
Internal arbitrary electronic gear ratio setting pulse equivalent
Use RS232 interface to modify parameters through debugging software PC
Can set PID parameters of position loop, speed loop and current loop
Optocoupler isolated differential signal input, strong anti-interference ability
Over-current, 12T, over-voltage, under-voltage, over-heat, over-differential, over-speed protection
Can display parameters such as motor running current, speed, tracking error through virtual oscilloscope
Use RS232 interface to change parameters through debugging software PC
Working voltage DC: 20-48VDC
Green light indicates running, red light indicates protection or offline
Over-current, I2T, over-voltage, under-voltage, over-heat, over-differential, over-speed protection
Can be equipped with a variety of incremental encoders of different accuracy (1000 line 1250 line 2500 line 5000 line can be set)
Note:
1. Do not connect the power supply in reverse. The input voltage should not exceed DC70V. When the driver is powered on, the green indicator POWER is on.
2. After setting the system parameters (such as the electronic gear ratio), you need to turn on the power again to take effect.
3. The input control signal level is 5V. When it is higher than 5V, a current-limiting resistor is required. When the control signal is 24V, a 2K 1 / 4W resistor must be connected in series.
Environmental indicators
cooling method | Free cooling or forced cooling |
Use environment | occasion | Avoid dust, oil mist and corrosive gases |
stored temperature | Minus 20 ° C to plus 80 ° C |
Ambient temperature | 50 ° C |
environment humidity | Less than 80% RH, non-condensing and no frost |
shock | 5.9m /s 2MAX |
weight | 0.35Kg |
Electrical index
Description | Minimum value | Typical value | Max value |
Supply voltage (V) | 24 | 36 | 70 |
Peak output current (A) | * | 6 | * |
Logic input current (mA) | * | 10 | * |
Input pulse frequency (KHA) | * | * | 250 |
Pulse low time (us) | 2.5 | * | * |
P1 input signal interface description
Marker symbol | Features | Detailed description |
PUL + | Pulse signal photoelectric isolation positive terminal | Connect to signal power, + 5V to 24V can be driven, higher than + 5V needs to be in PUL- Termination current limiting resistor |
PUL- | Pulse signal photoelectric isolation negative terminal | The falling edge is valid, and the motor takes one step each time the pulse changes from high to low. Input power Resistance 2202, requirements: low level 0 to 0.5V high level 4 to 5V, pulse width Degree> 2.5us. |
DIR + | Direction signal photoelectric isolation positive terminal | Connect to signal power, + 5V to 24V can be driven, higher than + 5V needs to be in DIR- Termination current limiting resistor |
DIR- | Direction signal photoelectric isolation negative terminal | Used to change the direction of the motor. Input resistance 2200, required: low level to 0.5V high level 4 to 5V, pulse width> 2.5us. |
ENA + | Motor release signal photoelectric isolation positive terminal | Connect to signal power, + 5V to 24V can be driven, higher than + 5V need to be in ENA- Termination current limiting resistor |
ENA- | Motor release signal photoelectric isolation negative terminal | When active (low level), the motor coil current is turned off, and the driver stops working. Operation, the motor is in a free state |
P3 motor power interface description
Address:
No. 38 Fenghuang Road, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
Changzhou Lanjibei Electromechanical Technology Co., Ltd was recombined new branded brother company of OWO international which established in 2020, our main products: BLDC motor drivers, BLDC water pumps, BLDC blowers, BLDC motors, industrial electrical products and automotive parts & accessories.
60% of our products are produced by our Production-oriented brother companies, our products are stable and reliable performance with powerful technical support, so we can offer comprehensive product solutions to our clients with competitive development ability. We are specialized and experienced in wide range of BLDC products, we have our own superb core technology and mature product line, even we have our own OEM controlling microchip. As most of Bextreme Shell products are directly come from the manufacturers (our brother companies), our products are more competitive pricing, more powerful developing ability, faster response and professional service.