Excavator Parts Hydraulic Rock Hammer Breaker Chisel

  This types of steel hammer rods is spare parts of Crusher SOOSAN,which belongs to consumables,and its application is wide.Using different crushers,the size of the drill rod and the tail shape is also different.Excellent crusher parts chisel tool has high wear resistance,high hardness.In order to meet customer demand,our company developed the different materials of drill rod,our company's hot sale products are EDT,MSB,FURUKAWA,BLT.

Features
a. High strength,hardness,wear-resistance,long life.
b. The steel hammer rods is processed with special heat treatment to ensure the breaker rod has enough hardness and toughness.
c. Extend its using life 10%--15% than normal drill rod.


Main parameters

How to use
a. Should check whether the Knapper piston is smooth before installation,whether any defaults,whether the sleeve is too large,if there are problems,please repair and replace it before you install the drill rod.
b. The drill rod should be vertical to objects when operating,if the object is slant,the drill rod should be also vertical to it,then broke it.
c. Please check whether the stone or the oncrete fracture is broken,if not,move it to certain distance to strike again,then the drill rod can be pulled out,please do not do it with brute force,this will damage the drill rod.
d. The drill rod cannot be used a lever to pry stones,tear cracks,which will easily cause breaking to the drill rod.
e. Drill rod may not strike at one place with long time,this will cause high temperature to the tip of  the drill rod,the durability will decrease,generally,the strike time can't be more than 30 seconds.
f. If the contact object or objects with the drill rod is too small ,too thin,please do not strike.Empty strike will increase the pressure to the piston and the drill rod,then damages will happen.
g. When the knapper drill rod is working,if found any abnormal sound,should immediately stop,to avoid cause damage.
h. Due to the high frequency,please filling grease once every 3 hours,to reduce the wear between the drill rod and the sleeve.When not use for long time,please apply antirust oil,in case of rusting.