New Selling Superior Quality Wall Decoration Exterior PVC 3D Panel for Walls

10 Inch Dutch Lap Vinyl Siding Panel
Raw Material:PVC+Ca+Additives
Product Width:29cm Effective Width: 25.4cm
Eco-Friendly Grade: EO
Characteristic: Waterproof,FireproofMoistureproof
Mothproof,Anti-UV,Impact Resistant etc
Application:Reconstruction,External Wall Protection.
Decoration of Schools,Factory,Villa, etc

9 Inch Dutch Lap Vinyl Siding Board
Raw Material:PVC+Ca+Additives
Product Width: 26.5cm EffectiveWidth:22.9cm
Eco-Friendly Grade:E0
Characteristic: Waterproof,FireproofMoistureproof
Mothproof,Anti-UVImpact Resistantetc
Application:Reconstruction,External Wall Protection,
Decoration of SchoolsFactoryVilla,etc

8 Inch Dutch Lap Vinyl Siding Panel
Raw Material:PVC+Ca+Additives
Product Width: 24cm Effective Width:20.3cm
Eco-Friendly Grade: EO
Characteristic: Waterproof,Fireproof,Moistureproof,
Mothproof,Anti-UV,Impact Resistantetc
Application: Reconstruction,External Wall Protection
Decoration of Schools,FactoryVillaetc

1.Polymeric Material,Durable,Good Weather Resistance
Durable This Material has very high tenacity,can defend impact from outside.
And it's also waterproof,moistureproof, mothproof, etc.

2.Wooden Texture and with Elegant Appearance
This product has clear wooden texture good coloration. It's the best
Wood Grain substitute for traditional decoration material such as wall coating
ceramic tile, bricks, etc.

3.Lock In Technology, Easy Install
For the installation, lock in technology is used.This structure can
Easy Install prevent rain from pulling in. Nails or screws are hiding inside, make
the wall looks pretty nice.

4.Anti-UV,Anti-Aging
When producing Vinyl Siding Panel, Imported ASA additives is added
Anti-UV and also color stabilizer.This solves aging and fading problem brough
by rain, wind,sun, etc.

5.Anti-Frozen
ACR Additives are added when producing Vinyl Siding Panel.This helps increase ductility of this product.It keeps in good condition even when temprature in -40ºC.

6.Fire-Retardant
Special additives are added to make it Fire-Retardant.Our Vinyl Siding can reach European B1 standard.It extinguishes once deviated from fire. It belongs to the highest flame retardant grade of combustible products

1.Start Strip
(1) Measure the height between eave and the lowest point
that vinyl siding panel covers.
(2) Based on the least height,draw a chalk line.Use level
to make sure that the line is horizontal.
(3) In parrel with chalk line,install start strip.
(4)Start Strip should has some space with Exterior
corner or Interior corneraround 1/4-1/3 inch.
(5)Screws or nails should be in the middle of slots,but
can not be too tight. Make sure that it can movefrom left to right. Around every 15 inch a nail.

2.Exterior Corner
(1)Use level to draw a vertical chalk line
(2) Flange of exterior corner should follow the chalk line in order for it to be
plumb.
(3)Length of exterior corner should be 1/4 inch less than the height of the
wall. For this space, you can install your soffit.
(4)For first nail, should be in the top of the nail.For other nails, it is better
to be in the middle of the slots.Distance between Nails shoule better be 12-15 inches
(5) Don't hammer nails tight into the backing or furringsthis will allow for
expansions and contraction. Usually distance between nail and vinyl siding shoule be 1/8 inch, and can move up and down just like this.(6) If wall is very high, need to joint several exterior corner together,the
upper one shoule be on the top.The underside one need to cut off 0.1 inch.

3. Interior Corner
The process to install Interior corner is almost same as exterior corner Please refer to the above instructions.

5.J Chanel on the top of the wall
(1)Before installing vinyl siding panel on the topinstall J channel
first.
(2) In the joint partcut 45°angle on the two pieces of J channel,
joint them together.
(3) When installing vinyl siding panel,keep the wall panel and J
channel on same plane