Baby Car Seat (SYPO-01A1)

SYPO-01A1

Tested and approved to Regulation ECE 44/03
The multi-position child seat
Suitable for children form 9kgs to 36kgs (Approx 9 months to 12 years)
For use as a child seat from approx 9 months to 6 years; Easily converts to booster cushion for use from approx. 3 to 12 years
Adjustable headrest to fit babies' different height
The child seat is approved for Groups 1/2/3
Art. No.: 00007 Code EAN: 6938601200007

FITTING THE BABYSEAT WITH BACKREST
Step 1. Place the BABY SEAT on the passenger seat ensuring it is firmly against the vehicle seat. (Remember to remove the headrest of the passenger seat being used if it causes an obstruction for proper installation of the BABY SEAT)

Step 2. Sit your child on the BABY SEAT with their back against the backrest. Position the lap section of the safety belt under both armrests(l)insert the buckle tongue in the belt buckle(2)pull the lap belt tight, Thread the shoulder belt under the armrest and then through the belt hook on the headrest(3). It is important that the diagonal belt lies comfortably over your child's shoulder.

Step 3. Should your child weigh between 9 and 18kg refer to the safety belt clamp should be used. The clamp is attached to a length of cord at the back of the seats. Take the cord and place it over the child's lap to the buckle side. Position both the lap and diagonal sections of the belt then clamp and fasten.

Step 4. To release your child from the BABY SEAT, simply release the belt buckle and carefully remove your child from the seat. When the BABY SEAT is not use, the seat belt should be fastened around it.