Basic Info.
Network Site
Border Router
Transfer Rate
10/100/1000Mbps
Port Structure
Not Modular
Performance
Line-Rate Router
Architecture
Crossbar System
Product Description
XPON ONU
4GE+AC WIFI+USB+POTS+CATV
SPECIFICATION
- Overview
- HUR4103XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access .
- HUR4103XR is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
- HUR4103XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
2. Functional Feature- Support EPON/GPON mode and switch mode automatically
- Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
- Support IPv4 and IPv6 Dual mode
- Support 2.4G&5.8G WIFI and Multiple SSID
- Support SIP Proctol for Voip Service
- Support CATV interface for Video Service and remote control by Major OLT
- Support LAN IP and DHCP Server configuration
- Support Port Mapping and Loop-Detect
- Support Firewall function and ACL function
- Support IGMP Snooping/Proxy multicast feature
- Support TR069 remote configuration and maintenance
- Specialized design for system breakdown prevention to maintain stable system
Hardware SpecificationTechnical item | Details |
PON Interface | 1 GPON BoB(Class B+/Class C+) |
Receiving sensitivity: ≤-27dBm/≤-29dBm |
Transmitting optical power: +0.5~+5dBm/+2~+7dBm |
Transmission distance: 20KM |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Design Scheme | RTL9607C+RTL8192FR(2.4G)+RTL8812ER(5G)+Si32192 BOB(RTL8290B) |
Chip Spec | CPU 950MHz,DDR2 128MB |
Flash | SPI NAND Flash 128MB |
LAN Interface | 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
Wireless | Compliant with IEEE802.11b/g/n,ac |
2.4G Operating frequency:2.400-2.4835GHz |
5.8G Operating frequency:5.150-5.825GHz |
2.4G 2*2 MIMO, rate up to 300Mbps |
5.8G 2*2 MIMO ,rate up to 867Mbps |
4 external antennas 5dBi |
Support Multiple SSID |
POTS interface | FXS, RJ11 connector |
Support: G.711/G.723/G.726/G.729 codec |
Support: T.30/T.38/G.711 Fax mode, DTMF Relay |
Line testing according to GR-909 |
CATV Interface | RF, WDM, optical power : +2~-15dBm |
Optical reflection loss: ≥45dB |
Optical receiving wavelength: 1550±10nm |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω |
RF output level: 78dBuV |
AGC range: -13~+1dBm |
MER: ≥32dB@-15dBm |
USB | Standard USB2.0 |
LED | 11 LED, For Status of PWR,LOS,PON,LAN1~LAN4,2.4G,5.8G Worn, Normal(CATV) |
Push-Button | 2 ,For Function of Reset and WPS |
Operating Condition | Temperature: 0ºC~+50ºC |
Humidity: 10%~90%(non-condensing) |
Storing Condition | Temperature: -30ºC~+60ºC |
Humidity: 10%~90%(non-condensing) |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 260mm×158mm×192mm(L×W×H) |
Net Weight | 0.35Kg |
Storing Condition | Temperature: -30ºC~+60ºC |
4. Panel lights IntroductionPilot Lamp | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. |
LOS | Blink | The device doses not receive optical signals or with low signals. |
Off | The device has received optical signal. |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. |
Off | The device registration is incorrect. |
LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). |
Off | Port (LANx) connection exception or not connected. |
2.4G | On | 2.4G WIFI interface up |
Blink | 2.4G WIFI is sending or/and receiving data (ACT). |
Off | 2.4G WIFI interface down |
5.8G | On | 5G WIFI interface up |
Blink | 5G WIFI is sending or/and receiving data (ACT). |
Off | 5G WIFI interface down |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -15dbm |
Off | Input optical power is between -15dbm and 3dbm |
Normal (CATV) | On | Input optical power is between -15dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -15dbm |
Address:
Shajing Street and a Community and a Second Industrial Zone 202, Building 7, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Security & Protection, Tools & Hardware
Company Introduction:
Shenzhen farce mai photoelectric technology Co., Ltd. With many years′ accumulation of communication network in the field of technology and engineering practice, geared to the needs of domestic and international communications network users, introduced based on the communication network of physical connection equipment and device FTTX (, FTTO FTTH, FTTB, FTTC) full range of solutions, to provide from the defense communication agency to the client a full range of fiber optic communications wiring products. Products include: Indoor and outdoor fiber optic cable, optical cable, optical devices, outdoor light box, fiber boxes, cable box/joint box, cable terminal box, optical fiber coupler/adapter, fiber optic jumper, five or six class 7 cables cat OLT, ONU/light, transceiver, video optical transceiver, optical transceiver, cold tools kit, etc. Wing hang photoelectric technology Co., Ltd. Shenzhen city with excellent product quality and good after-sales service, have a high status among consumers, the company with several retailers and agents established a long-term, stable relations of cooperation, with many varieties management characteristic and the meager profit but high turnover principle, has won the trust of customers.