Wooden Carving/Engraving Machine Handle, DSP Handle Rznc-0501

Function configure can set some special function in this DSP control handle, if users set is wrong, system will run error, system can't working. So set function configure correctly is necessary. Now we explain each function meaning and configuration method.
1\In manual interface, select "MENU" to enter, select "SYSTEM SETUP" press "ORIGIN" to enter.
2\Select "Function Configure", press "ok" to start configuration.
3\Configuration contents and method is as below:
1) "Do you need save power Off? " press "ORIGIN" means need, press "STOP"means don't need. (normal is need)
2) Language: Chinese/English, this is choose by users.
3) Set home switch:
X Axis: Enable Y Axis: Enable Z Axis: Enable Enable is means machine have home switch and is necessary. Select "Disable" is means this function is no use. After editing, press "ok" move to next. (normal is enable)
4) Go home types: There are 3 to choose, "info go home", "auto go home", "don't go
Home", we suggest users choose "info home" if there is no special.
5) Save Z adjusted value or not? : This is means whether to save Z changed depth in processing. Press "ORIGIN" to save, press "STOP" means not save.
6) Is there Emergent stop Sensor? : Means whether system connect emergent stop sensor signal, press "ORIGIN" means yes, "STOP"means no. (normal 0501 system don't support this function)
7) Is there Hard limit sensors? : The same function as emergent stop sensor. (normal0501 system don't support this function)
8) It is in traditional manual mode? : Means whether system in traditional manual mode, press "ORIGIN" means yes, "STOP" means no. (normal condition don't need)
9) T change setup: It contains "tool cover" and "dust cover", this is special for tool change system. If it is necessary choose enable, or choose disable. (normal 0501 system is disable)
Now all configurations is all right, please restart system. All configurations will take.