Basic Info.
Number of Switch
Multi Control Switch
Protection
Explosion-Proof
Certification
ISO9001, CE, ETL
Product Name
Zwave Smart 120V LED Dimmer Light Switch
Mechanical Life
100W Times
Operating Voltage
120VAC/60Hz
Maximum Load
150 W LED, 500 W Incandescent
Range
Min 30m Line of Sight
Transport Package
Neutral Packing
Specification
Size: 115(L)*70(W)*35(H)mm
Product Description
Product Description:
Z-Wave Certified Gateway: The MS11Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers.
Voice Control: This z-wave smart switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS.
Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports dimmable LED, CFL, incandescent, and halogen bulbs. Dimmer performance may differ from different bulbs. Supported voltage - 120 VAC.
Wireless Control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away. (10%-100% dimmability)
Installation Requires: With hard-wired connections - Neutral wire REQUIRED. Includes white faceplate.
The ZW31 Wall Mounted Switch is a component of the lighting control system. Wire the Wall Mounted Switch in place of a standard wall switch. Inclusion of this Switch allows remote ON/OFF control of loads connected. This Wall Mounted Switch is designed to work with other Z-Wave enabled devices. Z-Wave nodes of other types can be added to the system and will also act as repeaters.
EVA LOGIK Z-Wave In-Wall Dimmer Smart SwitchThis US type dimmer switch is fully controllable via your Z-Wave compatible HUB allowing you to remotely access your switch from anywhere in the world. Wire the 3-way switch in place of a standard wall switch
Rule your home into a smart home with EVA LOGIK Z-Wave Plus Smart Switch. Each switch product also gives you perfect control and perfect intelligent automation.
Technical data:
Item size | 11.5*7*4.4cm |
Net weight | 0.13kg |
Power | 120 VAC, 60 Hz |
Maximum Loads | 500W |
Operating temp | 32-104° F (0-40° C) |
Range | 30m line of sight |
Frequency | 908.42MHz |
Wireless standard | Z-Wave Plus protocol |
Certificated | Z-Wave plus/ETL |
This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL, incandescent, and halogen bulbs. Supported voltage - 120 VAC. Turn on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away. (10%-100% dimmability)
Monitor and control your lighting and small appliances with your smartphone. Connect this Z-Wave switch to your existing 3-way switch. It doesn't need a dedicated companion so you can save more on multi-switch set-up!
If you want to know more click here?
Features
Easy Installation
Manual or remote on/off and dimming control from your mobile device or computer (when included to a Z-Wave gateway hub)
Remembers and restores on/off status after power failure
2 ramp rate options
500 chip for faster and safer wireless communication
Works with LED, CFL, and incandescent bulbs
Remembers and restores on/off status after power failure
Supported by most Z-Wave gateway controllers
Can be used in rules and scenes with other Z-Wave devices for advanced home automation
Customizable LED indicator
Air-gap switch for added safety
Built-in Z-Wave signal repeater
Z-Wave plus certificates
Installation
1. Before installation ensure that the voltage supply is disconnected.
2. Connect the ZW31 module as shown in the above diagram.
3. Connect the device in accordance with the wiring diagram presented in the Wiring diagram. Switch on 120V of the mains voltage.
4. For "Add" in a network: Put the Z-wave interface controller into "Add" mode, and following its instruction to add the ZW52 to your controller. To get in the "Add" mode, the distance between the ZW31 module and controller is suggested to be in one meter. Quickly pressing the learn switch of ZW31 for 1 second at least & release to be included.
5. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW31 from your controller. Press the learn switch of ZW31 for 1 second at least &release to be excluded.
IMPORTANT!
The fixture controlled by the Z-Wave In-wall Smart Dimmer must not exceed 600 watts (Incandescent); 150W dimmable CFL/LED. The Dimmer is designed only for use with permanently installed fixtures.
FAQ
Q1: What kind of certificated do you have?
A1: CE,SAA,FDA,CCC and ISO9001
Q2: How about the payment term?
A2: T/T, L/C, Western Union, Paypal, CASH
Q3: How about the shipping period?
A3: Samples for 3-14days, Bulk orders 30 working days or adjustable.
Q4: What is the warranty for our products?
A4: 1 year. But we are always in service.
If any product meets your demand, please contact Allison for further information.
Address:
Jinlian Commercial Center 9001, Jinxiu Road No. 2, Changan Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Consumer Electronics, Electrical & Electronics, Furniture, Light Industry & Daily Use, Lights & Lighting, Security & Protection, Tools & Hardware
Management System Certification:
ISO 9001, BSCI
Company Introduction:
Nie-Tech Co., Ltd., a manufacturer, founded in 2009. Our full range of successful in Z-Wave, ZigBee, WiFi & Bluetooth Smart home products both home and industrial application. Welcome to buy smart switch, smart control module, smart sensor, personal security, the smart gateway in stock here from professional manufacturers and suppliers in China. Our factory offers the best-customized products made in China with competitive price. Contact us for quotation.