Changzhou Changmei Ultrasonic Quilting Machine

The operation panel
Feeding speed:this can control feeding roller speed, You can set freely.you can set like picture ,feeding speed must be
faster the quilting speed,because after feeding will need move cutter and cut.
Quilting speed:pattern roller speed, You can set freely. you can set like picture.
Cross movement speed:it will control the cross movement speed from left to right and from right to left. please set as
picture.
Cross cutter speed: it will control cutter speed.because when cutting,the cross cutter will rotate.Please set as picture.
Quilting speed add rate:when feeding speed has been more quickly than quilting speed,at this time quilting
speed will be faster by itself.but avoid stopping and waiting, you can set this rate.
Batch & pcs rate:this depend on total output and batch output.
Batch set:you can set this freely,for example you set 9999batch,when arrive 9999batch,will stop.
Note : When you receive machine you can set as our picture to try.After you can understand
clearly you can set by yourself.except total output and batch output will be clear.
3: Technical Parameters
Specification  CJ-2600-S
Power       380V 3P, 50/60H
Effective width 0-2600m
Working speed 0--20m/
Machine size  3000*3000*1900mm

1. W         3000K

4: Debug Operation
1) Check The Machine:
Before power on, carefully check the integrity of the part electrical box in the transport process is somewhat off.
2) Mechanical Debugging:
Before operation, first keep the device level, Machine must be reliable grounding ,turn on the power switch, adjust the roller and the transducer, let the device no load operation , if we find
an exception, turn off the total power supply, check the electrical components, or to get in touch with the equipment manufacturer.
5, Failure Analysis
Maintenance And Notes
1. Apply limited pressure on roller in order to prolong service life of roller &horn.
2. Check the wire connections, also the machine parts inside the ultrasonic box before operation.
3. Keep air flow and the ambient temperature won't be too high (30 degrees or less).
4. Don't let water enter into the ultrasonic box and ultrasonic transducer/horn.
5. When not in use for long time, oil the metal parts and cover the machine placed in a dry ventilated place.
6. The ultrasonic box should be opened monthly, with a clean air gun to remove dust.
7. Machine needs rest regularly, can't be work more than 9 hours each time.
8. Don't touch ultrasonic transducer in order to avoid high voltage shock.
9. Don't insert your fingers into roller when machine is running.
10. Machine should be grounded reliable.