Australia Digital LCD Display Programmable 24hours Timer Socket

INSTRUCTION Manual
24/7 DAYS DIGITAL TIMER WITH RANDOM AND DST
This unit is a direct plug-in timer intended to control the electronic power to an appliance.
Features:
-- 8 key Timer Function
-- Time setting includes HOUR, MINUTE and DAY.
-- Daylight Savings Time adjustable
-- Random function
-- 12 hours / 24 hours
This time switch is a direct plug-in timer intended to control the electronic power circuit to the appliance.
1. Initial Setup
1.1 Use a paper clip to press the 'RESET' reset button for 10 seconds to clear all settings. Than the LCD will display status as follow 'picture 1', after appear 'picture 2'status, you can start next step.
 
 2. Clock Function
 
When in Time display mode:
2.1 LCD shows day, hour and minutes
2.2 To adjust the Day press the 'CLOCK' key together with the 'WEEK' key to adjust.
2.3 To adjust the hour press the 'CLOCK' key together with the 'HOUR' key to adjust.
2.4 To adjust the minute press the 'CLOCK' key together with the 'MINUTE' key to adjust.
2.5To change switch 12hour/24hour mode press the 'CLOCK' key together with the 'TIMER' key.
 
3. Setting the Timer
Press the 'TIMER' key to enter the setting mode:
3.1 Press 'WEEK' key to choose the group of days you wish to switch the appliance on for. The group will advance in the sequence of MO TU WE TH FR SA SU MO TU WE TH FR SA SU MO TU WE TH FR SA SU MO TU WE TH FR SA MO WE FR TU TH SA MO TU WE TH FR SA MO WE FR SU.
3.2 Press the 'HOUR' key to adjust.
3.3 Press the 'MINUTE' key to adjust.
3.4 Setting mode will exit if no button is pressed for 20 seconds or press the 'CLOCK' key to exit.
3.5 Press the 'RESET/RECALL' key to delete/recall the most recent setting.
3.6 Press the 'TIMER' key to advance to the next on/off setting position. Repeat steps 2.1 - 2.5.
 
Note:
1. Pressing the key HOUR, MINUTE or TIMER for more than 3 seconds will advance the settings at an accelerated rate.
2. Please finish all install before device first start work time.
 
4. Daylight Savings Time
4.1 To change to/from DST press the 'CLOCK' key together with the 'ON/AUTO/OFF' key.
 
5. Random Function
5.1 Press the 'RANDOM' key, the LCD display will display 'RANDOM' to indicate that the RANDOM function is in effect from 6:00PM to 6:00AM.
5.2 To cancel the RANDOM function simply press the RANDOM key again and the 'RANDOM' indicator will turn off.
 
6. Operation
The LCD displays the status as -
AUTO: Will operate as per the settings.
ON: The unit is permanent controlled in ON status.
OFF: The unit is permanent controlled in OFF status.
ON AUTO OFF
 
Special Technical Data:
Voltage: 230~/50Hz
Installation: Plug-in Type
Rating: 230V~ AC / 16A /3680W
Setting Time: 1 Minute
Battery: NIMH1.2V>100hrs.
 
Attention:
No serviceable parts inside.