Basic Info.
Signal Transmission
Wired Alarm
Certification
ISO, CCC, Nepsi
Working Principle
Catalytic Combustion,Semiconductor,Electrochemical
Alarm Volume (within 1m)
≥80dB
Transport Package
DHL, TNT, FedEx, Shipping, etc
Specification
17.5*22.0*10.5cm, 2.1KG
Product Description
1. Technical specificationsDetectable gases: Combustible gases and steams, toxic and hazardous gases (see A01, A03 and B04~B29 in the list of detectable gases)Sampling mode: diffusive samplingOperating voltage: DC24V±6VPower consumption: ≤3W (DC24V)Electrical interface: G3/4" internal threadExplosion proof grade: ExdIICT6 GbProtection grade: IP66Shell: cast aluminum or stainless steelDimension: 204mm×155mm×70mm (length×width×thickness) Weight: about 1.5kg (cast aluminum), 4.5kg (stainless steel) 2. Major featuresHighly-integrated functional module designThe sensor module integrates a sensor and a processing circuit, to complete all data operation and signal switching of the detector independently. Its unique heating function expands the detector's low temperature service capability. The detector module is for power supply, communication and output functions; Overlimit protection for high concentrationIn case of overlimit of high concentration gas, the sensor module can cut off power supply automatically. Detection works every 30s until the concentration is normal and power supply is resumed. This function can prevent reduction of the sensor's service life resulted from being submerged in high concentration gas; Standardized digital interfaceStandard digital interfaces are used between modules. Anti-misplug gold-plated pins are good for on-site hot plug replacement; Flexible combination and multiple output modesMultiple detector modules and multiple types of sensor modules can be combined flexibly to form detectors with special output functions and applicable to different targets to meet customers' customized demands; Replace a sensor as easy as replacing a bulbSensor modules for different gases and ranges can be replaced freely. No calibration is required after replacement. That is, the detector can read ex-factory calibrated data and work immediately. In this way, the product has a longer service life. Meanwhile, detection calibration can be done easily at different sites, avoiding complicated dismantling process and difficult on-site calibration and reducing later maintenance cost; On-site LED concentration display, and diversified calibration modesHighlight LED real-time concentration display, with farther and wider visual distance and angle, applicable to industrial environment requirements; the detector can be set/calibrated in different ways, such as by keys or by an IR remote controller or a magnetic bar, and it is easy to operate. 3. Model selectionModel | Signal output | Sensor equipped | Adaptive control system | Model |
AEC2232bX, GQ-AEC2232bX | /A | Four-bus system (S1, S2, GND and +24V) and contact outputs of two sets of relays (one set of relay for alarm signal ouput and one set of relay for failure signal output) | Catalytic combustion, semiconductor, electrochemical, IR & PID | ACTION gas alarm controllers: AEC2301a, AEC2302a, AEC2303a and AEC2305 |
| Three-wire (4~20)mA standard signals and contact outputs of three sets of relays (two sets of relays for alarm signal ouput and one set of relay for failure signal output) | DCS/EDS/PLC/RTU control system; ACTION gas alarm controllers: AEC2392a, AEC2392b, AEC2393a and AEC2393b |
Address:
88 Wulian West Street, Iot Industrial Park, Southwest Airport Economic Development Zone, Shuangliu, Chengdu City, Sichuan Province, Chengdu, Sichuan, China
Business Type:
Manufacturer/Factory
Business Range:
Security & Protection
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Chengdu Action Electronics Joint Stock Co., Ltd, founded in 1998, located in Chengdu, Sichuan province. As a well known manufacturer in the industry, it has 22 years′ experiences with 450+ workers, 27814.5m2 workshops, takes the lead in releasing bus based communication products, TOP3 in the industry and the First-class qualified supplier of CNPC/SINOPEC/CNOOC. Mainly engaged in gas leakage solutions, intelligent gas detector&gas alarm controller system design, research and development, production, sales and service. Support OEM/ODM service for clients around the world. The factory has the traditional gas leak detection industry′s fine bloodline, gathers the super strong design and development ability, the technical support system is perfect, the quality request is excellent, in the profession public praise is quite good. Moreover, it has large production sites and automatic production lines. All the employees are familiar with the development of the industry for more than ten years. Our factory has complete production, assembly, storage and other supporting hardware, more professional team configuration sales, sales documentary, physical control department, production PMC, IQC\QC, all in order to meet any customer requirements, wholeheartedly create a good product.