| Number of control axes: 5 axes (X, Y, Z, A,B) |
Number of linkage axes: 5 axes |
Feed shaft function | Position instruction range: metric input (G21) : -9999.9999mm ~ 9999.9999mm, minimum instruction unit: 0.0001 |
Position command range: Inch input (G20) : -999.9999inch to 999.9999inch. Minimum command unit: 0.0001inch |
Electronic gear: instruction frequency doubling coefficient 1 ~ 65536, instruction frequency division coefficient 1 ~ 65536 |
Fast moving speed: maximum 60m/min |
Rapid rate: F0, 25%, 50%, 100% four levels of real-time adjustment |
Cutting feed speed: up to 15m/min (G94) or 500.00mm/r (G95) |
Feed rate: 0 ~ 150%, a total of 16 real-time adjustment |
Manual feed rate: 0 ~ 150%, 16 levels of real-time adjustment |
Hand wheel feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears |
Single step feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears |
Interpolation methods: linear interpolation, circular interpolation, spiral interpolation and rigid tapping |
TAutomatic chamfering function |
Acceleration and deceleration function | Cutting feed: front acceleration and deceleration linear, front acceleration and deceleration S type, rear acceleration and deceleration linear, rear acceleration and deceleration exponential type |
Fast moving: front acceleration and deceleration linear, front acceleration and deceleration S, rear acceleration and deceleration linear, rear acceleration and deceleration exponential |
Manual mode and handwheel mode are after acceleration and deceleration control. Handwheel mode can be selected as immediate stop mode or complete operation mode. |
The start speed, end speed and time of acceleration and deceleration are set by parameters |
Quick location You can locate a line or a broken line |
Main function | 2 channels 0 ~ 10V analog voltage output, support dual spindle control |
1 way spindle encoder feedback, spindle encoder line number can be set (100p/r ~ 5000p/r) |
Transmission ratio between encoder and spindle :(1 ~ 255) (1 ~ 255) |
Spindle speed: can be given by S code or PLC signal, speed range 0r/min ~ 9999r/min |
Spindle ratio: 50% ~ 120%, a total of 8 grades of real-time adjustment |
Spindle constant line speed control |
Rigid tapping |
Function of cutting tool | Tool length compensation |
Tool tip radius compensation (Type C) |
Precision compensation | Pitch error compensation: compensation points, compensation interval, compensation origin can be set |
Reverse clearance compensation: can be set to a fixed frequency or speed up and down to compensate the amount of reverse clearance machine |
The PLC function | Two-stage PLC program, up to 4700 steps, level 1 program refresh cycle 8ms |
Number of instructions: 45 (including 10 basic instructions and 35 functional instructions) |
Support PLC warning and PLC alarm |
Support multiple PLC programs (up to 20), the current running PLC program can be selected |
Basic I/O: 52 input /52 output |
The man-machine interface | 10.4-inch widescreen LCD with 800×600 resolution |
Display in Chinese, English and other languages |
Two dimensional tool path display |
Real time clock |
Operation management | Operation mode: edit, automatic, input, machine zero back, hand wheel/single step, manual, program zero back |
Multi-level operation permission management |
Alarm log |
The program to edit | Program capacity: 56MB, 400 programs (including subroutines, macroprograms) |
Edit function: program/program segment/word search, modify, delete, copy, paste |
Program format: ISO code, support statement macro code programming, support relative coordinates, absolute coordinates and mixed coordinates programming |
Program call: support macro program call with parameters, 4 levels of nested subroutines |
Communications functions | RS232: parts program, parameters and other files two-way transmission, support PLC program, system software serial port upgrade |
USB: U disk file operation, support PLC program, system software U disk upgrade |
Safety features | Emergency stop |
Hardware travel limit |
Software trip check |
Data backup and recovery |