Basic Info.
Certification
RoHS, ISO, CE
Update Method
by Our Engineer
Transport Package
Support Customized
Specification
16*13*4.5cm
Product Description
OBD2 Head-Up Display
Model : L3
INTENDED USE
The head-up display is intended for:Display vehicle data such as speed, engine RPM, battery voltage, fuel consumption, coolant temperature, etc.Warnings related to engine malfunctions and exceeding the programmable speeds or the engine RPM.Support information related to monitoring driving time and distance
CONTENTS
Check the package contents immediately after unpacking. Check the device and all parts for damage. Do not use a defective device or parts.head-up displayNon-slip matOBD connecting cableOperating instructions
PRODUCT OVERVIEW:
No. | Description |
1 | Speed < 199 |
2 | Engine malfunction |
3 | Alertness assistant |
4 | Speed unit (km/h or MPH) |
5 | Symbols |
6 | Brightness sensor |
7 | Multifunction display, speed > 200 |
8 | Projection surface |
9 | Function wheel |
10 | On/Off switch |
11 | OBD connecting interface |
Symbols
CONNECTING
The head-up display connects to the vehicle via OBD2 cable, plug and play.
Usually the OBD2 interface is typically located on the driver's side, approx. 30 cm from the middle of the instrument panel.
Turn the ignition off, connect the OBD cable to vehicle OBD2 interface Connect the OBD cable to the interface [11] on the head-up displayHide the OBD cable like above picture show. Turn the ignition on, flip open the projection surface, then it can work.
ASSEMBLY
Attention! when installing the head-up display, be sure it does not diminish your vision. The connecting cable must not interfere with your ability to drive and the head-up display must be firmly secured.
Select a mounting location [A-D] on the dashboard.Place the non-slip pad in the desired location.Place the head-up display on the non-slip pad.
OPERATION
Warning: do not operate the head-up display whilst driving, as this will distract you from traffic. Maintain your focus on driving and traffic.
Switching on the head-up display
Use the On/Off switch [10] to switch on the head-up display. Set the switch to the ON position.The display will show the battery voltage for approx. 10 seconds. It will then show the current speed (km/h).
Switching off the head-up display
Use the On/Off switch [10] to switch off the head-up display. Set the switch to the OFF position.The display will turn off.
Switching the display interface
When head-up display power on, it will show voltage voltage first
The display on the projection surface [8] will change, the left part is speed, the right part can change to multi-function
Speed + clockSpeed + coolant temperatureSpeed + engine RPMSpeed + fuel consumptionSpeed + driving distanceSpeed + driving timeSpeed + oil temperatureSpeed + intake pressureSpeed
When ignition off, head-up display will show the average fuel consumption for this trip (Liter/100km)
SETTINGS
The value on the head-up display should match the values on your vehicle's dashboard. If this is not the same, you can change the settings of head-up display in the setting menu.
Hold on the function wheel [9] for 5 seconds to open the setting menu.Push the function wheel [9] forward or backward to move to the next setting.Briefly press the middle of the function wheel [9] to change a value.Hold the function wheel [9] for 5 seconds again to exit the setting menu.
SETTING MENU
No. | Option | Display | Range | Description |
| Speed | | -9~9 | Correction value if the speed in the head-up display does not match the vehicle's data. |
| 4 level speed alarm | | 0~1 | 0-on ( alarm when speed reach 60 km/h, 80km/h,100km/h,120km/h) 1-off |
| 1 level speed alarm | | 30~250 | Alarm when speed reach 180 km/h |
| Engine RPM | | -25~25 | Correction value if the engine RPM in the head-up display does not match the vehicle's data. |
| Engine RPM alarm | | 1000~8500 | Alarm when engine RPM reach 5000r |
| Voltage alarm | | 9-16 | Alarm when voltage reach 10 V |
| coolant temperature alarm | | 60-150 | Alarm when coolant temperature reach 120 ºC |
| Alarm sound on/off | | 0-1 | 0-Off the alarm sound 1-On the alarm sound |
| Shifting reminder | | 1000~8500 | Alarm when engine RPM reach 5000r |
| Brightness by manual | | 0-11 | 0 = auto brightness 1-11 = manual brightness |
| Lowest brightness in auto mode | | 1-11 | 1-11 can adjust the auto brightness |
| Fuel consumption calculation | | - | 0-use Inlet flow to calculate the fuel consumption 0.2~10.0 - use Engine displacement to calculate the fuel consumption |
| Fuel consumption | | -20~20 | Correction value if the fuel consumption in the head-up display does not match the vehicle's data, adjust range is -20%~20% |
| Clock | | - | Push the function wheel [9] forward to set the hours, backward to set the minutes. |
| Speed unit | | 0-1 | KM/HMPH |
| Clear the engine malfunction | | - | Unplug HUD Turn the key to ON (power on) connect the HUD and wait for the normal display find menu 15, push the function wheel [9] forward or backward once HUD will give a beep sound,it means clear the engine malfunction. |
Problem | Solution |
No display | Start the engine. Verify the head-up display is switched on. Verify the OBD connecting cable is correctly and firmly connected. If the problem continues, test the head-up display in a different vehicle with OBD2 interface and protocol |
Display incorrect | Adjust the correction values.Restore the factory settings of the head-up display from the settings menu.Older vehicles may not display all values. |
How to restore to factory setting | First, keep the HUD in the off state, and then push the function wheel [9] forward first, and turn on the on/off switch[10] at the same time, HUD will give a Long beep, it means restore to factory setting successful. |
Inaccurate speed | In the setting menu, find menu 0, the adjust range is -9~9, if HUD show faster 2 km/h than dashboard, adjust the setting value to -2, if HUD show slower 2 km/h than dashboard, adjust the setting value to 2. |
Inaccurate clock | In the setting menu, find menu 13Tap the function wheel [9] forward to set the hours, briefly press the function wheel [9] can change the hours valueTap the function wheel [9] backward to set the minutes, briefly press the function wheel [9] can change the minutes valueHold on the function wheel [9] for 5 second to save and exit |
NOTICE:
If set speed unit to KM/H, the water temperature unit will automatically be ºC, driving distance unit will automatically be KM, fuel conusmption unit will automatically be L/100 KM
If set speed unit to MPH, the water temperature unit will automatically be ºF, driving distance unit will automatically be Mile, fuel conusmption unit will automatically be MPG.
Address:
Room 101, Block a, Jianye Building, No. 7, Nonglin Road, Zhuyuan Community, Xiangmihu Street, Futian District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Acclope Co., Ltd is committed to pursuing the peak of professional automotive safety electronics. Our company specializes in the development and production of Electronic throttle controller, car HUD heads up display, OBD2 gauge, LED lights, electronic dogs, car DVR etc.
Outstanding cost-effective and reliable quality is our style. We integrate R & D, manufacturing, production, testing, sales and service. We have elite team of engineering designers and molders. We insist on "survive by quality, develop by innovation, seek long-term by service".
Our service include: OEM, ODM, good afrer sale service. Our products have been sold in Australia, the United Kingdom, Germany, South Korea, Taiwan, the United States, Canada, Italy, Brazil, Turkey, Malaysia, Thailand, Bangladesh and other countries. We focus on creating a relaxed and harmonious working environment, encourages employees to express their opinions and listens to customers and employees sound.
Hope to cooperate with you: )