Acclope Car GPS Hud Head up Display Speed Clock Oil Temperature Driving Distance

HUD car head-up system
G2 GPS
User manual

Before using this product, please read the instruction manual carefully to fully understand and utilize all the functions of the product. In order to let you experience the speed while ensuring your driving pleasure and driving safety.
Product description
Car head-up display, referred to as HUD. When the vehicle is driving at a high speed, especially during high-speed driving at night, the driver looks down at the meter display. If there is an emergency in front of the vehicle, it may cause an accident due to the lack of effective measures. In order to avoid this, the head-up display (HUD) system can mirror important information displayed by the meter (such as the speed of the vehicle) to the driver's head-up range of the front windshield during the driving, display the position and  brightness automatically. In this way, you can avoid looking down at the dashboard, thus shortening the blind time of the eyeball to the front. Avoid over-speed violations in many speed-limiting sections, and more importantly, it allows the driver to instantly read in the absence of a large field of view.

 
Product appearance
Description of each part of HUD:
01.  Power switch
02. [Left] button, move to the left
03. [OK] button, press down vertically
04. [Right] button, move to the right
05.  Power Interface 12VDC



 
Function description
Screen introduction


01. Speed display area
02. Unit symbol: KM/H-km/h, MPH-miles per hour.
03. Compass display area: displays the current driving direction.
E (East), ES (Southeast)
S (South), SW (Southwest)
W (West), WN (Northwest)
N (North), NE (Northeast)
04. Buzzer, alarm icon.
05. System settings icon.
06. Photosensitive element: Automatically adjusts the display brightness as the brightness of the outside changes.
07. GPS signal indication:
Flashing display - searching for satellite signals
Constantly displayed - satellite signal has been searched
 
First time use
After connecting the HUD display, data cable and car cigarette lighter socket, turn on the HUD power switch, flashing "Hud", the host will boot normally.


 
2 display modes
When the HUD host is used independently, you can press the OK button to switch the displayed content.

Display content: speed + compass

Display content: speed
 
Settings
In the normal working state of HUD, press and hold the [OK] key for 3 seconds to enter the HUD setting interface. You can switch the desired setting by dialing the left and right keys, and press the [OK] key to enter the setting. After the setting is completed, press the [OK] key to save. The machine will automatically return to the normal working state in about 8 seconds.


F-1. Settings: Buzzer (default: ON)
                 1: ON, 2: OFF
F-2. Setting: Vehicle speed alarm (default: 120KM/H)
F-3. Setting: HUD display brightness (default: 00, automatic), The higher the value, the brighter the brightness
F-4. Setting: speed coefficient (default: 100)
If the speed displayed on the HUD does not match the dashboard, you can adjust this parameter for calibration.
 
Restore factory settings
01: Turn off the power switch of the main unit.
02: Turn on the power switch while holding down the [OK] key.
03:  "0" is displayed in the middle of HUD, the factory setting is completed.
 
Preparation before installation and use
01. Use the included non-slip mat to place it in a flat position in front of the bridge. The HUD main unit can be placed on top and adjusted at any time.
02. Insert the data cable into the main unit and insert the vehicle key into the cigarette lighter connector on the car.
03. The host screen is displayed and can be used normally.
HUD car head-up system
G2 GPS
User manual


Before using this product, please read the instruction manual carefully to fully understand and utilize all the functions of the product. In order to let you experience the speed while ensuring your driving pleasure and driving safety.
Product description
Car head-up display, referred to as HUD. When the vehicle is driving at a high speed, especially during high-speed driving at night, the driver looks down at the meter display. If there is an emergency in front of the vehicle, it may cause an accident due to the lack of effective measures. In order to avoid this, the head-up display (HUD) system can mirror important information displayed by the meter (such as the speed of the vehicle) to the driver's head-up range of the front windshield during the driving, display the position and  brightness automatically. In this way, you can avoid looking down at the dashboard, thus shortening the blind time of the eyeball to the front. Avoid over-speed violations in many speed-limiting sections, and more importantly, it allows the driver to instantly read in the absence of a large field of view.