Polishing Machine, Dremel Making Tool Kit (WX04)

Specification

1. Variable speed pattern: Any speed
2. Scope of application: Burnishing, polishing, engraving

Accessory information:

Rotary Tool And Accessory Set/
Grinder stone
Diamond bits
Connective posts
Cutting disk
Polishing wheel
Polishing paste
Drill bits
Collet
Sanding paper
Steel brush

Security matters

1: When installing soft shaft or replace grinding head, be sure to ensure unplug the power supply plug!
2: Soft shaft and the fuselage chuck, soft shaft and grinding head of clamping head, be sure to use small key lock.
3: When electric grinding on the power supply, power switch must be OFF open state.
4: Before processing, in addition to the work piece fixed firm outside, still should try to turn the electric grinder (light), confirmed that no abnormality can processing after operation.
5: Operation before using, deal with used grinding head carefully check, it is strictly prohibited to use has been damaged or cracking of the grinding head
6: Use tools, should wear protective glasses.
7: Parts of the processing. Should be proper control of electric grinding hand the pressure, avoid by all means is too much force. 8: Use cutting disc processing, be sure to ensure that personnel from the tangent of the cutting disc to prevent cutting disc slapper hurt

Maintenance instructions

1: Soft shaft and electric grinder fuselage connection, unless special circumstances, please do not frequent disassembly.
2: Electric grinder in running 15 - twenty minutes, please stop cooling.
3: For not familiar with machining process or processing materials, please send electric grinding speed from low start tuning up, especially for plastic, organic glass, etc. Not high temperature resistant material, more attention should be paid to low speed operation, otherwise, it will burn dissolved materials, damage the grinding head.
4: First use waste material in electric grinder please do first test, accumulate experience.
5: Resin cutting thin and fragile, feed time light up the light, keep cutting disc and machined part vertical, don't move.
6: Always check whether the power cord good conjunction, check whether the plug loose bending, check the switch action and speed control choose button is agile and reliable

Any question about our products, we will happy to answer you within 24hours Sincerely look forward to any of your Inquiry
Fuzhou Wangxiang Stainless Steel Products Co., Ltd. is a professional manufacturer of jewelry making tools & equipment, electronic balance, diamond testers, jewel consumables, polishing machine, bristle brushes, polishing buff etc.