Basic Info.
Transport Package
Carton Box
Product Description
Excellent Vibration Performance IMU For Various Industry Spot Testing
PRODUCT DESCRIPTION IMU570 inertial navigation unit is composed of three-axis gyroscope, three-axis acceleration, temperature sensor and signal processing circuit. The three-axis angular rate of the carrier is measured, and the three angular rate data after error compensation (including temperature compensation, installation misalignment compensation, non-linear compensation, etc.) are output through RS422 serial port according to the agreed communication protocol. The product adopts differential gyroscope structure, effectively restrains the influence of linear acceleration and vibration, and adopts full temperature compensation to suit the harsh environment of industrial application.
Features |
★ measure triaxial angular velocity of carrier ★ working temperature:-40~85ºC ★ storage temperature :-40~85ºC ★ Vibration:10~2000Hz,10g ★ power supply :+5±0.5V(DC) ★ impact:100g@11ms,Triaxial (half sinusoidal) |
Application :
★ Autopilot Vehicle ★ Unmanned Aerial Vehicle ★AGV
★ SOTM attitude unit ★ POS System for Surveying and Mapping
★ Ship and Marine Engineering ★ Ocean and Underwater Surveying and Mapping
★ Flight Control System ★ High Speed Train Measurement and Control System
Specification :
IMU570 Parameters |
Attitude angle | Roll / Tilt 1σ (Dynamic) | 0.5° | |
Heading | 0.5° | |
Gyro | Measuring range | 1800°/s | |
Zero bias instability (@Allan variance) | ≤8°/h(-20~70 ºC) | |
angle random walk (@Allan variance) | ≤0.13°/√h & 0.24°/√h | |
Zero Bias Acceleration Sensitivity | ≤1°/h/g | |
Resolution | ≤0.001°/s | |
Scale factor nonlinearity | ≤100ppm | |
Scale factor repeatability | ≤100ppm | |
Cross-coupling | ≤0.1% | |
Bandwidth | ≥200Hz | |
Accelerometer | Measuring range | ±38g | |
Zero bias instability (@Allan variance) | 0.019mg | |
Zero bias repeatability | 0.08mg | |
Speed random walk (@Allan variance) | 0.04m/s/√h | |
Zero Bias Error in Full Temperature Range | 0.5mg | |
Weight | (52±5)g | |
Other parameters | Power supply voltage | (+5±0.5)V(DC) | |
Power supply Current | Working current<0.3A | |
Working temperature | -40~85ºC | |
Storage temperature | -40~85ºC | |
Vibration | 10~2000Hz,10g | |
Impact | 100g@11ms,Triaxial (half sinusoidal)) | |
ELECTRICAL CHARACTERISTICS
IMU570 The electrical connector type of the integrated inertial navigation system is J30J-15ZKP,the specific PIN definition is shown in the table below;
Pin | Pin Definition | Type | Instruction |
1 | EARTH | IN | Shell connecting pull end, mobile device connecting power GND, fixed equipment connecting housing protection GND (0V) |
2 | VDD | Power positive | Power positive 4.5VDC~7VDC |
3 | RS422-RX+(RS485-A) | IN | Communication interface(-7V~+12V) |
4 | RS422-TX-(RS485-B) | OUT | Communication interface(-7V~+12V) |
5 | RTK-232-GND | IN | RTK Communication GND(0V) |
6 | RTK-RS232-TX | OUT | RTK RS232Communication interface(-15V~+15V) |
7 | NRST | IN | External reset function(The descending edge is valid and must be enabled by the manufacturer.)(b) |
8 | ExtTrig | IN | External trigger signal(The descending edge is valid and must be enabled by the manufacturer.)(c) |
9 | GND | Power negative | Power negative (0V) |
10 | RS422-GND | IN | RS422(RS485)communication GND(0V) |
11 | RS422-RX- | IN | Communication interface(-7V~+12V) |
12 | RS422-TX+ | OUT | Communication interface(-7V~+12V) |
13 | RTK-RS232-RX | IN | RTK RS232 Communication interface(-15V~+15V) |
14 | RTK-PPS | IN | RTK Second pulse input |
15 | TOV | OUT | Output Co-frequency Signal(a) |
NOTE: 1)Synchronization signals need to be specially configured according to requirements. The default IMU
integrated inertial navigation system has not this configuration and needs to be suspended.
2)Reset signals need to be specially configured according to requirements. The default IMU integrated inertial navigation system has not this configuration and needs to be suspended.
3)External trigger sources need to be specially configured according to requirements. The default IMU integrated inertial navigation system has not this configuration and needs to be suspended.
For other more spec. please contact :
Manufactuer name | Shenzhen Rion Technology Co.,Ltd |
Contact person | Alice Du |
| |
Desk phone : | +86-755-29657137 EXW 818 |
| |
| |
| |
Address: | Baoan Dis. Shenzhen City , China |
Address:
4th Floor Block 1, Cofco(Fuan) Robot Industry Park, Da Yang Road 90, Fuyong Distict, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other, Group Corporation
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001, ISO 9000, ISO 14000
Company Introduction:
RION Technology Co., Ltd. Is located in a fantastic city - Shenzhen. Our company is a high technology company that integrates research, development, production and sale, and is mainly engaged in the sale of inclinometer sensors, digital compasses, digital dipmeters and acceleration sensors. These products are widely used in many industrial control fields, such as automobiles, ships, airplanes, railways, medical facilities, dam safety monitoring, oil drilling, coal mining and ocean surveying. Our company has established good business relationships with many international famous companies.
We adhere to the service guideline of "Client-centered". "Client uppermost, credit first, service best" is our business philosophy. Our company provides accurate, efficient, civilized and complete services for clients.
Let us provide you with the best products. To save purchasing cost and time, contact us now.