Digital Satellite Receiver (DM500S/C/T)

1) Like DM500S, Philips tuner

2) D500-S technical data
A) 250 MHz PowerPC Processor (350 Mips)
B) Linux Operating System
C) 1 x Smartcard-Reader
D) MPEG2 Hardware decoding
E) Common available NIMs (DVB-S, DVB-C, DVB-T)
F) V. 24/RS232 Interface
G) 10/100Mbit compatible Ethernet Interface
H) 2 LED status
I) unlimited channel lists for TV/Radio
J) channel-change time < 1 second
K) full automatic service scan
L) supports directly bouquet-lists
M) supports EPG (electronic program guide)
N) supports own videotext
O) supports multiple LNB-Switching control (supports DiSEqC)
P) fully adaptable OSD in many languages and skin-support
Q) S/PDIF Interface for digital bit stream out (AC-3)
R) 1 x Scart-interfaces

3) DBS-tuner:
A) Frequency range: 950 ~ 2, 150MHz
B) Signal level: - 65dBm ~ 25dBm
C) Signal-to-noise level: 12dB max.
D) DBS-tuner input connector F-type female
E) Input Impedance 75ohm
F) AFC: 3MHz
G) Demodulation shaped QPSK
H) FEC viterbi and reed-solomon
I) Vertebrate: 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
J) Roll-off factor: 35 %
K) Demultiplexing according ISO13818-1

4) Video decoder:
A) Video compression: MPEG-2 and MPEG-1 compatible
B) Video standard: PAL G / 25Hz
C) Video formats 4: 3 / 16: 9
D) Footage 16: 9, automatic assimilation for 16: 9 TV-device (over Scart)
E) Letterbox precolating for 4: 3 TV-device

5) Audio decoder:
A) Audio compression MPEG-1 & MPEG-2 Layer I and II
B) Audio Mode Dual (main/sub), Stereo
C) Frequency: 32KHz, 44.1KHz, 48KHz, 16KHz, 22.05KHz, 24KHz

6) Output analog:
A) Output Level L/R 0.5Vss on 600ohm
B) THD: >60dB (1KHz)
C) Crosstalk: <65dB

7) Output digital:
A) Output level: 0.5Vss on 75ohm
B) Sampled data filtering 32KHz, 44.1KHz, 48KHz
C) S/PDIF - output optical (AC3)

8) Video parameter:
A) Input level FBAS 1Vss0.3dB on 75ohm
B) Teletext filter in conformity with ETS 300 472 standard

9) TV-scart: Output: FBAS, RGB, S-VHS

10) Serielle Interface RS 232:
A) Type: RS232 bidirectional
B) Bitrate: 115.2kBit/s max.
C) Plug connector SUB-D-9
D) Function: Update of firmware.