Basic Info.
Model NO.
DIN35 1x1 MI 4-20mA
Kind
Two-wire Transmitter
Wire-Assembly Type
Two-wire Transmitter
Customized
Non-Customized
Transport Package
Bubble Bag+Waterproof Bag
Product Description
two-wire 4-20mA Isolation amplifier
1-input-1-output passive two-wire 4-20mA Isolation amplifier Model: DIN35 1*1 MI 4-20mA Features:Small size, low cost, No correction directly use
Two-port isolation(input, output)
1-input-1-output
High accuracy(0.1% F.S, 0.2% F.S)
High linearity(0.1% F.S)
High isolation voltage(3000VDC/60S)
Low temperature drift(35PPM/ºC)
Low impedance(voltage drop <3V, 20mA)
Wide Industrial class operation temperature(-45~+85ºC)
Wide voltage input (7.5V-32V)
High reliability (MTBF>50 Wan hour)
Passed CE Certificate
International standard signal input and output(4-20mA/0-20mA)
Application:
DC current/voltage signal isolation, conversion and amplification
Analog signal ground interference suppression and analog isolation, acquisition
4-20mA/0-20mA sensor signal isolation, transformation and signal distribution conversion
Instrumentation and sensor signal transceiver
Two-wire primary/secondary instrumentation signal acquisition and isolation
Power isolation monitoring industrial site
Analog signal data isolation, acquisition, conversion, and distance transmission
Industrial field signal isolation and conversion, and distance transmission without distortion
Power monitoring, medical equipment isolation barrier
Overcome inverter, large motors, power equipment, acquisition systems, DCS and PLC Field interference
General Description:
JIE Sheng Da Technology DIN35 1x1 MI 4-20mA two-wire passive single-channel analog signal Isolation amplifier is a signal conditioner with electrical insulation between input and output, it can receive a variety of analog signal from the field instrument, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS system. The product is isolated between input and output , the isolated voltage is up to 3000VDC .It is widely used in the industrial measurement systems, medical electronic equipment, electrical equipment etc. Adopting high efficiency electromagnetism isolation technology to achieve signal isolation, it is available to keep high output accuracy, good linearity and low temperature drift. For dual-channel Isolation amplifier please choose DIN35 2*2 MI 4-20mA series.
Selections and Definitions:
Product Selection Parameter List: |
DIN35 | 1x1 | MI | 4-20mA | Detailed description |
Package Marking Code | | | | Standard DIN35 rail mounting |
Channel code | | | 1-input-1-output |
Isolation code | | Magnetic Isolation Products |
current signal Input | 4-20mA current signal input |
current signal output | 4-20mA current signal output |
Selection Example:Example 1: Signal input 1:4-20mA; signal output 1:4-20mA; Model: DIN35 1*1 MI 4-20mAExample 2: Signal input 1:0-20mA; signal output 1:0-20mA; Model: DIN35 1*1 MI 4-20mASigns | Item | Test Condition | Min | Typ. | Max | Units |
Isolation characteristics | Isolation voltage | AC,50Hz,(Tested for 1 minute humidity<70% ,leakage current < 1mA,) | | 3000 | | V(rms) |
Insulation resistance | 500VDC(input/output) | | 100 | | MΩ |
Transmission characteristics | Gain drift | | | ±35 | | ppm/ºC |
Non-linearity | | | ±0.1 | ±0.2 | %FSR |
Input | current | | 4 | 20 | 30 | mA |
Output oououtoutput | current | | 4 | | 20 | mA |
Load capacity | current | RL≤(Us-5)/0.02 Us: Loop power supply voltage | | 250 | | Ω |
Frequency Response | small-signal band width,Io=20mA | | 50 | | Hz |
Signal output ripple | | | 5 | 10 | mVRMS |
Power input characteristics | Power supply | voltage | | ―― | ―― | ―― | VDC |
Power loss | | ―― | ―― | ―― | W |
Range | | ―― | ―― | ―― | % |
operating temperature | | -45 | | 85 | ºC |
storage temperature | | -55 | | 105 | ºC |
weight | | | 60 | | g |
size | 94.5*25.5*41 | mm |
Note | Normal load ≤ 300Ω |
PIN:Outputting types | Pin | Function | Pin | Function | Storage |
Single channel passive 4-20mA current output | 1 | Signal input + | 5 | NO PIN(NC) | Standard DIN35 rail mounting |
2 | Signal input - | 6 | NO PIN(NC) |
3 | NO PIN(NC) | 7 | Signal output + |
4 | NO PIN(NC) | 8 | Signal output - |
Notes:1,Please read the user manual carefully before using. If any question please contact our technical support department.2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,4,To avoid invalid, or any failure, users disassemble this product is forbidden5,the product is strictly forbidden demolish without permission for not damage 6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.7,In this datasheet, all the test methods of indications are based on corporate standards.Copyright:Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.trademarkAll other trademarks and copyrights belong to their respective owners
Address:
Huafujin Building 601, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Security & Protection
Management System Certification:
ISO 9001, ISO 9000, BSCI
Company Introduction:
Shenzhen Jie Shengda Technology Co., Ltd. is a collection development, production, trade as one of the high-tech enterprises, it has been dedicating to design and produce AC-DC power modules, DC-DC power modules, high voltage power modules, Medium Voltage Modules, micro-power DC-DC converter, isolation transmitter, isolation amplifier, signal isolation, 4-20mA Isolation Amplifier, 4-20mA series, distributors series, Splitters series, conditioners, two-wire isolation amplifier, active isolation amplifier (optocoupler isolation and magnetic isolation two series), mV-level small signal isolation amplifier, isolation power transmitter, PT100 RTD temprature signal isolation transmitter, power isolation transmitter, fence, V/F frequency pulse isolation transmitter, F/V frequency pulse isolation transmitter, resistors (displacement) signal isolation transmitter, switch signal isolation transmitter, pressure isolation transmitter, non-isolated amplifier, data acquisition converter(D/A converter, A/D converter, RS-232/RS-485) high-tech enterprises. Self-developed products meet international standards, products performance reliability and through EMC Certification (CE certification), the input and output signals are adopting international standard signal designs. (eg: 4-20mA/0-20mA/0-10V/0-5V/1-5V/0-10mA/0-100mV, etc. ) compatible with the vast majority of domestic and foreign well-known brands, our products categories covering more than thousands, is industrial automation applications analog signals, digital signals hybrid integrated circuit development, and manufacturing companies.