Basic Info.
Input
PT100,PT1000,Cu100,Cu50
Output
4-20mA/0-20mA/0-10mA/0-10V/0-5V/0-3.3V
Power
5V/12V/15V/24V/9-36VDC
Transport Package
Bubble Bag+Waterproof Bag
Specification
115*100*17.5mm
Product Description
Thermal Resistance temperature signal isolation transmitter
1-input-1-output Thermal Resistance temperature signal isolation transmitter
Features:
Small size, low cost, international standards DIN35mm rail mounting
Three-wire, four-wire Pt100 or (PT1000, PT10, Cu50, Cu100) thermal resistance signal input
International standard signal output (0-3.3V/0-5V/0-10V/1-5V/4-20mA/0-20mA/0-10mA options)
Internal Built-linear circuit, long-term compensation circuit
High accuracy (0.1% F.S, 0.2% F.S)
High linearity (0.1% F.S)
High isolation voltage (3000VDC/60S)
Three-port isolation between input, output and power supply
Low temperature drift (100 PPM/ºC)
Industrial temperature range (-45~+85ºC)
High reliability (MTBF> 50 Wan hour)
Power supply (5VDC/12VDC/15VDC/24VDC/9-36VDC options)
Application:
Temperature signal isolation, acquisition and conversion
industrial field precision temperature measurement
thermal resistance signal isolation and temperature control
ground interference suppression
temperature sensor signal change into standard signal
oil temperature measurement and alarm
signal transmission distance without distortion
power monitoring, medical equipment ,temperature control, isolation safety barrier
General Description:
Jieshengda Technology JSD TARZ-1001 series thermal resistance temperature signal isolation transmitter convert and isolate the thermal resistance signal from Pt100 or (PT1000, PT10, Cu50, Cu100) inputting at high temperatures from low, and transmit a standard output signal or user-specified special signal to the control room,PLC,PC or DCS systems. However, Thermal Resistance temperature signal input and analog signal output is linear.Jieshengda Technology JSD TARZ-1001 series thermal resistance temperature signal isolation transmitter integrates a set of multi-channel high-isolation DC/DC power supply, a few high-performance signal isolators and RTD linearization, long-term compensation, interference suppression circuit, especially for (Pt100 RTD signal isolation converted into a standard signal, temperature signal remote transmission with no distortion, industrial fields temperature signal acquisition and isolation, high-precision temperature measurement on-site measurements, oil temperature measurement and alarm), the thermal resistance signal isolation transmitter adopts with optical isolation technology, so that the isolation transmitter has high isolation voltage 3000VDC and strong anti-electromagnetic EMC interference capability, improved product reliability and stability by SMD Chip and modular technology designed to make products satisfy harsh industrial environments. Jieshengda Technology JSD TARZ-1001 series thermal resistance isolation transmitter is easy to use and needn't external components, can achieve thermal resistance signal isolation transmitter and conversion. If 1-in-2-out/2-in-2-out/isolation transmitter please purchase JSD TARZ-1002 or JSD TARZ-2002 series.Product Selection Parameter List: |
Thermal resistance code | Input temperature range | Power supply code | output signal code |
1: | PT1000 | 1: | -20-100ºC | W: | 9-36VDC | 1: | 4-20mA |
2: | PT100 | 2: | 0-100ºC | 1: | 24VDC | 2: | 0-20mA |
3: | PT10 | 3: | 0-150ºC | 2: | 15VDC | 3: | 0-10mA |
4: | Cu100 | 4: | 0-200ºC | 3: | 12VDC | 4: | 0-5V |
5: | Cu50 | 5: | 0-400ºC | 4: | 5VDC | 5: | 0-10V |
| | | | 5: | 220VAC | 6: | 1-5V |
| | | | | | 7: | 0-3.3V |
U: | user-define | U: | user-define | U: | user-define | U: | user-define |
Note: | When ordering ,please determine input,output and power , special can customize |
Selection Example:
Example 1:Input:Pt100;temperature range:0~150ºC;power:12VDC;output:4-20mA;Model: JSD TARZ-1001-2331Example 2:Input:Cu50;temperature range:0~400ºC;power:24VDC;output:0-10VDC;Model:JSD TARZ-1001-5515Electrical Characteristics: Signs | Item | Test condition | Min | Typ. | Max | Units |
Isolation characteristics | Isolation voltage | AC,50Hz,tested for 1 minute, humidity<70% leakage current < 1mA | | 3000 | | V(rms) |
Transmission characteristics | Gain drift | | | | 100 | ppm/ºC |
Non-linearity | | | 0.1 | 0.2 | %FSR |
Input characteristics | Signal Input | Two-wire | PT1000,PT100,PT10,Cu100,Cu50 options ( Temperature range options :-200ºC~+600ºC) |
Three-wire |
Four-wire |
Output characteristics | Signal output | voltage | | 0 | 10 | | V |
current | | 0 | 20 | 24 | mA |
Load capacity | voltage | Vout=10V | | 2 | | kΩ |
current | | 0 | 350 | 500 | Ω |
Power Input Characteristics | Power supply | Voltage | | 5 | 12 | 36 | VDC |
Power loss | | | 0.8 | 1 | W |
Range | | -10 | | +10 | % |
Other characteristics | Operating temperature | | -45 | | 85 | ºC |
storage temperature | | -55 | | 105 | ºC |
weight | | 120 | | | g |
Size | | 115x100x17.5 | mm |
Output types | Pin | Function | Pin | Function | storage |
Voltage/ Current output | 1 | Power + | 7 | A | Standard DIN35 Rail mounting |
2 | Signal Out + | 8 | B |
3 | Signal Out - | 9 | B |
4 | Power - | 10 | NC |
5 | NC | 11 | NC |
6 | NC | 12 | NC |
Remarks:1. For two-wire, three-wire or four-wire thermal resistance input, please refer to the wiring diagram respectively.2. Three-wire thermal resistance disconnection detection: (a. Maximum output: the wire connected to pin 7 or 9 is broken; b. Minimum output: the wire connected to pin 8 is broken.)Notes:1,NC pin must not be connected to any external circuit, otherwise it will damage the product itself; 2,Please read the user manual carefully before using. If any question please contact our technical support department. 3,Please do not use this product in hazardous area. The power supply of this product should be DC power source. It is forbidden to use 220VAC power supply.4,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty5,the product is strictly forbidden demolish without permission for not damage 6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 7,In this datasheet, all the test methods of indications are based on corporate standards.Copyright:Copyright © 2018 Shenzhen Jieshengda Technology Co., Ltd.Without the prior written permission of the company, any content in this manual may not be copied, distributed, translated or transmitted in any form or method (electronic or mechanical).Including photocopying, recording or storage in any information storage and retrieval system. This manual is subject to modification or update without notice.trademarkAll other trademarks and copyrights belong to their respective owners
Address:
Huafujin Building 601, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Security & Protection
Management System Certification:
ISO 9001, ISO 9000, BSCI
Company Introduction:
Shenzhen Jie Shengda Technology Co., Ltd. is a collection development, production, trade as one of the high-tech enterprises, it has been dedicating to design and produce AC-DC power modules, DC-DC power modules, high voltage power modules, Medium Voltage Modules, micro-power DC-DC converter, isolation transmitter, isolation amplifier, signal isolation, 4-20mA Isolation Amplifier, 4-20mA series, distributors series, Splitters series, conditioners, two-wire isolation amplifier, active isolation amplifier (optocoupler isolation and magnetic isolation two series), mV-level small signal isolation amplifier, isolation power transmitter, PT100 RTD temprature signal isolation transmitter, power isolation transmitter, fence, V/F frequency pulse isolation transmitter, F/V frequency pulse isolation transmitter, resistors (displacement) signal isolation transmitter, switch signal isolation transmitter, pressure isolation transmitter, non-isolated amplifier, data acquisition converter(D/A converter, A/D converter, RS-232/RS-485) high-tech enterprises. Self-developed products meet international standards, products performance reliability and through EMC Certification (CE certification), the input and output signals are adopting international standard signal designs. (eg: 4-20mA/0-20mA/0-10V/0-5V/1-5V/0-10mA/0-100mV, etc. ) compatible with the vast majority of domestic and foreign well-known brands, our products categories covering more than thousands, is industrial automation applications analog signals, digital signals hybrid integrated circuit development, and manufacturing companies.