Basic Info.
Application
Home, Training
Size
Adjustable, XL, XS, M, L, S
Color
Colored, Blue, Black
Transport Package
Color Box
Product Description
Model | WT738N1 |
Gross Weight(kg) | 0.7kgs |
Receiver weight(kg) | 0.06kgs |
Box size(cm) | 18×15×4.5cm |
Receiver size(cm) | 6.5×4×3cm |
Remote size(cm) | 13×3×4.5cm |
Collar maximum(cm) | 54cm |
Collar minimum(cm) | 25cm |
Qucik Starting Guide
1. Newly Released, 100% Brand New and high quality Dog Remote Training System
2. Rechargeable & waterproof Dog E Collar, and it can be used up to 2 Dogs
3. For mild-mannered to stubborn disposition dogs
4. Four Mode for Dog Training: Static shock mode / Vibration mode / Beep mode / Light mode
5. 100 levels of vibration & static(optional) for Effective Pet Dog Training.
6. 300 meters remote control range, over 3,000 different identity codes to prevent conflicts
with other e-collars
7. Featured power saving design, works on dogs from 10 to 120 pound dogs
Dog Behavior Educate
Your pet dog needs equal extent of Behavior Educate as that of any other Child in your family. He is also susceptible if you spend time to stay with him and train him to be a PERFECT & GENTLE Dog , like not pee /poop anywhere, not scratch on sofa / fabric, not catch all kinds of food even dirty . Being a responsible owner of a pet you are required to be a cautious observer of the behavioral changes and physical movements of your dog to ensure dog health & spirit care. Your dog will be performing its tasks and activities well if he is in a good Health & Spirit.The following device might help you to take up effective steps for dog:
Packing Detail
Transmitter | x 1 |
Receiver | x 2 |
Nylon Strap | x 2 |
Charger | x 1 |
Charging Cable | x 1 |
Contact Probes | x 8 |
Test Light | x 1 |
Use Manual | x 1 |
Charge the remote transmitter:
1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red light on the Transmitter will be lighted.
4. Charge the Transmitter at least 6 hours for the first charger.
5. After fully charged, the red led will be turned off automatically.
How to Use the Transmitter
1. To turn on/off the Transmitter,Press the mode button on the transmitter for 5 seconds.
2. By pressing the Mode button to change to different modes the LCD images will change.
3. Press the up and down buttons on right hand side to set level.
4. Choose the different channels for different receivers.
5. The Transmitter will go into STANDBY MODE if not operated for 20 seconds and will turn
off if not operated for 2 minutes.
6. In STANDBY MODE, press any button to wake it up.
Charge the collar receiver:
1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.
3. The red LED light inside the Collar Receiver will turn on
4. Charge the Collar Receiver at least 6 hours for the first charge.
5. After fully charged, the red LED light will be turned off automatically.
6. When charging is completed, put the rubber cover in the right position to keep the
internal unit from dust and water.
7. Low battery Indicator:the Collar Receiver will keep beeping for 2 minuets unless it gets
charged.
Connect transmitter and receiver:
1. Turn on the Transmitter and choose 1or 2 channels to encode.
2. Lift the Reset part of the Rubber cover in the Collar Receiver.
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver.
4. Press the LAUNCH button on the Transmitter immediately while you are hearing a beep
from the collar.
5. The Collar Receiver will beep , it means that the Transmitter has encoded the collar.
6. After completion, put the rubber cover in the right position to keep the internal unit from
dust and water.
Notice:
1. The transmitter will go into Standby Mode if there is no operation after 20 seconds and
will turn off after 20 minutes. The receiver will go into Standby Mode if unused for 4
minutes. Any movement from the dog will activate the receiver.
2. "1/2" button to choose channel for connection. Channel 1 can only operate the first
receiver and Channel 2 can only operate the second receiver.
3. In working mode, if you want to reconnect the receiver to the transmitter, simply press
the reset button with a pen or paper clip, there will be a beep sound to indicate that it is
ready to encode.
4. The design of the receiver is to be rainproof. The rubber cover has to put in the right
position to ensure rainproof.
Model | WT738N1 |
Gross Weight(kg) | 0.7kgs |
Receiver weight(kg) | 0.06kgs |
Box size(cm) | 18×15×4.5cm |
Receiver size(cm) | 6.5×4×3cm |
Remote size(cm) | 13×3×4.5cm |
Collar maximum(cm) | 54cm |
Collar minimum(cm) | 25cm |
Address:
Rm 6001, Building 3, Yilida Building, Chuangye Road, Nanshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics
Company Introduction:
Shenzhen Wellturn Technology Co., Ltd has been endeavoring to develop in consumable electronic products and gifts markets since its establishment 10 years ago. Years of trading experience have brought us great confidence in business operation.
Shenzhen Wellturn Technology Co., Ltd. Is a leading dog training robot field with custom dog collar, dog collar, remote training collar, dog remote training collar, stop dog collar, ultrasonic barking dog training equipment and so on.
We persisted in taking "first-class quality, competitive prices, punctual delivery" as our objective, adhered to the principle of "the quality guaranteed, sincere and faithful, considerate service, win-win partnership".
International trade is a main business of WELLTURN. With good quality products and all-around service, WELLTURN obtained trust and recognition from many overseas clients. Now, we have been the purchasing agent in the mainland for many famous overseas clients. We′d like to provide higher quality products and satisfied service for domestic and overseas clients with all our hearts.
Shenzhen Wellturn Technology Co., Ltd
Phone: +86 (0755) 86196958
Fax: +86 (0755) 86196956
Address: Room 6001, Block 3, Yilida Building, 1092 NanshanAvenue, NanshanDistrict, Shenzhen, China 518054