Polypropylene Fiber Mesh for Concrete Reinforced

+Product Name

EE Polypropylene Fibers Mesh Type

+Product Description:
EE Polypropylene fibers Mesh is made from modified polypropylene, with processes of squeezing, stretching, networking, surface modification, chopping etc. The fiber is of network structure resulting from several cross-connected monofilament fibers.
When cast into concrete, the PP fiber Mesh is squeezed and torn into two head hook-shaped monofilaments connecting with each other and distributing multi-directionally, so as to enhance adhesion capacity of the fiber and concrete
+Physical parameters
Type: Mesh                       Color: White
Density:  0.91kg/m3                Tensile Strength:  ≥500Mpa  
Melting Point: 160-170ºC             Elastic Modulas:>3500 MPa
Security: non-toxic                  Moisture content: <0.2
Ignition Points: ≥580ºC               Elongation at Break: >10%
Equivalent Diameter: <100um
Acid, Alkali & Salt Resistance: very high 
Electrical Conductivity: very low
Moisture absorption: non-absorbent     
Fiber Length: 6, 8, 12, 19, 24 mm

+Applicant
Improve the impermeability of concrete
Improve the anti-cracking ability of concrete
Improve the impact and fatigue resistance of concrete
Improve the wear-resistance of concrete
Improve the plastic deformation ability of concrete
Strong resistance against acid and alkali, excellent stability.

EE Polypropylene fibers Mesh is widely be used in concrete pavement, bridge deck, airport runway, mine wall, roof, tunnel, dam, dike, wharf revetment, reservoir and other
industrial and civil building.

+Advantages
Easily spreads around in mortar or concrete
Easily use
Fine economic property
Stable chemical property
Strong acid and alkali resistance

+Usage:
Dosage: 0.9-1.5 kg /m3
Length: generally, proper length of the fiber added into the concrete is 19mm
Mixing Process: Crushed stones, fiber will fully spread and then add cement and water and stir normally .the addition of materials also can be put into as usual .but the stirring time should be properly prolonged to more than 4 minutes to make fiber completely mixed.
+Packaging
  1.0Kg/Plastic bag or degradable bag.


*The information contained in this document is given in good faith and by way of information at the time of printing. As the potential uses of our products are many and outside our control, each user is responsible for asking us for information on planned applications, as we cannot be held liable on the basis of general information. The buyer is required to monitor and respect, in his sole liability, the conditions under which our products are stored and used in his territory, to provide all required information to the user, and to respect all existing patents and all regulations applicable to our products and to his activity.