Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
Polyethylene modified asphalt tape
I. Use and Features:
Polyethylene modified asphalt tape is a novelty anti-corrosive cold winded adhesive tape developed by this company based on traditional PE anticorrosive adhesive tape. Its base material consists of high and low density synthetic PE film, and its adhesive consists of high adhesion thermal-plastic modified self-bonding anti-corrosive adhesive and an anti-sticky release film. This product can be widely used for outer corrosion protection and repair in water supply & drain, oil and gas, coal gas transmission steel pipelines and buried steel tanks in petroleum, natural gas, chemical industry, municipal construction. This product is a novelty environmental protection type anticorrosive product without pollution and harm. In comparison with traditional anti-corrosive adhesive tape, this product has the following advantages:
(1) High adhesion, self-fusion, water proof, gas tightness and good sealing property.
(2) High electric insulation, excellent anti-aging stability, and strong anti-ultraviolet light.
(3) Soil stress-caused damage resistance and high impact resistance.
(4) Single winding of adhesive tape can realize ordinary or enhanced corrosion protection meeting SY/T0414-98. This product eliminates the need for multi-winding of traditional adhesive tape, minimizes the maninduced effect on anti-corrosive quality during corrosive protection, and reduces construction cost.
(5) Easy and fast construction, no curing period, selection of either manual or mechanical operation, and reduction of construction period.
(6) Low cost, and no pollution and three-waste.
Nationally authoritative test body approves that polyethylene modified asphalt tape has all the test indices exceeding SY/T0414-2007 and meeting ANSI/AWWAC209-00NACEMR0274-95. This product is the most economical environmental protection type product of anti-corrosive cold winded adhesive tapes and therefore is worthy of generalizaiton.
II. Main Technical Parameters:
III. Use Method:
(1) Surface preparation: Remove rust, welding slag, burr, oil and dirt and keep clean and dry. Manual rust removal shall reach Class St3, mechanical rust removal shall reach Class SA2 and meet SYJ4007-86.
(2) Primer application: Select specialized primer and keep it away from a fire. Stir it well and apply it evenly with a clean brush or roller or in other mechanical ways. Primer consumption: 12? /L (Manual painting) and 20? /L (mechanical painting)
(3) Do not apply the adhesive tape until the primer surface is dry (typically after 5 to 10 min).
IV. Transport and Storage:
(1) The adhesive tape is protected from direct sunshine, rain, heavy object, heat and fire during transport.
(2) Construction does not begin until this product is stored
I. Use and Features:
Polyethylene modified asphalt tape is a novelty anti-corrosive cold winded adhesive tape developed by this company based on traditional PE anticorrosive adhesive tape. Its base material consists of high and low density synthetic PE film, and its adhesive consists of high adhesion thermal-plastic modified self-bonding anti-corrosive adhesive and an anti-sticky release film. This product can be widely used for outer corrosion protection and repair in water supply & drain, oil and gas, coal gas transmission steel pipelines and buried steel tanks in petroleum, natural gas, chemical industry, municipal construction. This product is a novelty environmental protection type anticorrosive product without pollution and harm. In comparison with traditional anti-corrosive adhesive tape, this product has the following advantages:
(1) High adhesion, self-fusion, water proof, gas tightness and good sealing property.
(2) High electric insulation, excellent anti-aging stability, and strong anti-ultraviolet light.
(3) Soil stress-caused damage resistance and high impact resistance.
(4) Single winding of adhesive tape can realize ordinary or enhanced corrosion protection meeting SY/T0414-98. This product eliminates the need for multi-winding of traditional adhesive tape, minimizes the maninduced effect on anti-corrosive quality during corrosive protection, and reduces construction cost.
(5) Easy and fast construction, no curing period, selection of either manual or mechanical operation, and reduction of construction period.
(6) Low cost, and no pollution and three-waste.
Nationally authoritative test body approves that polyethylene modified asphalt tape has all the test indices exceeding SY/T0414-2007 and meeting ANSI/AWWAC209-00NACEMR0274-95. This product is the most economical environmental protection type product of anti-corrosive cold winded adhesive tapes and therefore is worthy of generalizaiton.
II. Main Technical Parameters:
III. Use Method:
(1) Surface preparation: Remove rust, welding slag, burr, oil and dirt and keep clean and dry. Manual rust removal shall reach Class St3, mechanical rust removal shall reach Class SA2 and meet SYJ4007-86.
(2) Primer application: Select specialized primer and keep it away from a fire. Stir it well and apply it evenly with a clean brush or roller or in other mechanical ways. Primer consumption: 12? /L (Manual painting) and 20? /L (mechanical painting)
(3) Do not apply the adhesive tape until the primer surface is dry (typically after 5 to 10 min).
IV. Transport and Storage:
(1) The adhesive tape is protected from direct sunshine, rain, heavy object, heat and fire during transport.
(2) Construction does not begin until this product is stored
Address:
Economic and Technological Development Zone, Langfang, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company, Other, Individuals/SOHO
Business Range:
Chemicals, Electrical & Electronics
Company Introduction:
Product range: Polyethylene anticorrosive adhesive tape, polypropylene fiber anticorrosive adhesive tape, polyethylene type 660 integrated anticorrosive adhesive tape, radiant cross-linked polyethylene heat-shrinkable sleeve, heat-shrinkable strip, water-proof cap, mending plate, polyethylene double-sided anticorrosive adhesive tape, solvent-less anticorrosive coatings, nanometer ceramic anticorrosive materials, coal-tar epoxy paint, heat-shrinkable tube, heat shrinkable tube with adhesive tape and anticorrosive products for heat-shrinkable power cable accessories.
Since its establishment, the company has all the time upheld the concept of "striving constantly for perfection and adhering to honesty and trustworthiness" and worked unremittingly based on the thought of "Integrating with channel resources and promoting the development of the industry". Our tenet is "Developing and enterprising, oriented to integrity and focusing upon the demand of customer. "
We have won the faith and support of our customers with excellent professional ethics, first-class commercial reputation, high quality products and perfect after-sales services in the course of operation. The company has had extensive channels, substantial strength, consummate technology and specialized support.
The products operated and sold by us have been tested by the Quality Supervision and Inspection Center of Anticorrosive Thermal-Insulting Products of China National Petroleum Corporation and the Comprehensive Laboratory of the Pipeline Technology Research Center of China Petroleum Pipeline Engineering Corporation. The whole indexes have reached or exceeded relevant standards and requirements.
Looking forward to the future: A high mountain makes us realize that the road is far; Only rapid-flowing water can we realized that it has a deep source. On the road of increasing development and the times at which the current electronic commerce network information is increasingly popular, we will supply the customers with perfect after-sales service, try to supply immediate services on demand, give specialized services whole-heartedly, make great efforts to support more perfect after-sale services and first-rate technical support, repay the society and the customers. Go forward hand in hand with the customers and the industry colleagues and share with success.
Welcome new and old customers to visit us, and we will serve you with utmost sincerity.
Since its establishment, the company has all the time upheld the concept of "striving constantly for perfection and adhering to honesty and trustworthiness" and worked unremittingly based on the thought of "Integrating with channel resources and promoting the development of the industry". Our tenet is "Developing and enterprising, oriented to integrity and focusing upon the demand of customer. "
We have won the faith and support of our customers with excellent professional ethics, first-class commercial reputation, high quality products and perfect after-sales services in the course of operation. The company has had extensive channels, substantial strength, consummate technology and specialized support.
The products operated and sold by us have been tested by the Quality Supervision and Inspection Center of Anticorrosive Thermal-Insulting Products of China National Petroleum Corporation and the Comprehensive Laboratory of the Pipeline Technology Research Center of China Petroleum Pipeline Engineering Corporation. The whole indexes have reached or exceeded relevant standards and requirements.
Looking forward to the future: A high mountain makes us realize that the road is far; Only rapid-flowing water can we realized that it has a deep source. On the road of increasing development and the times at which the current electronic commerce network information is increasingly popular, we will supply the customers with perfect after-sales service, try to supply immediate services on demand, give specialized services whole-heartedly, make great efforts to support more perfect after-sale services and first-rate technical support, repay the society and the customers. Go forward hand in hand with the customers and the industry colleagues and share with success.
Welcome new and old customers to visit us, and we will serve you with utmost sincerity.
){kind=link}