Polyurethane Belt Welding Kit -Round Belt Welding Tools Kit-Belt Joining Kit

Polyurethane belt welding kit -round belt welding tools kit-belt joining kit

Welding tools kits included below accessories:
-1 pcs of Constant temperature heating electric Soldering iron
-1 pcs pf Aluminum welding clamp -Black or Silver as option
-1 pcs of Vertical / Angle shear scissors

The voltage is available in 220 V and 110 volts for European customers.
This belt connector is butt welding tools, if you want to overlap welding tools or overlap service, please contact our sales to got detail.

Operating Instruction For PU V-Belt / Round Belt Welding Tool Kits
1) Pre-heat the soldering iron, cut the belt by the scissors, make sure the transverse incision is flat and smooth
2)Loosen the four big screws of the welding clamp, adjust the height of aluminum plates to put the belt into it.
3) Put the two ends of belt into the locating slot (If the belt size is small, adjust the four small screw of clamp to fit it.), preset
protruding length on both ends of the belt, make the two end belt match perfectly.
4) Place the soldering iron between two ends of belt, gently tighten the clamp, make both ends completely touch soldering iron.
5) Heat the soldering iron, when the PU are melted and effluent approximately 0.5~1mm, take out the soldering iron quickly, fasten
the welding clamp by the side screw.
6) Natural cooling about 3 minutes, then take off the belt.
7) Grinding the joint smoothly, check both ends of belt are vertical and fix. if not, please repeat the above steps again.

Announcements
1. The welding kit's small parts may be loose and dusty after long-distance transportation or a certain time of storage, please clean up
the surface, check and test it after open the packing.

2.When find the belt can't be welded, check whether the soldering iron is heating first. Otherwise, please change another belt to
repeat above operating instruction again.

3.Hand will be burned easily by soldering iron if operator is tired and careless during the period of working.

4.Check if the voltage and plug of soldering iron are available to use in your side, if not, please change a power supply or contact us
in advance.