Basic Info.
Type
Glass Laminating Machine
Product Description
I Laminated Glass Production Line:
1. Technical Features of Automatic Laminated Glass Production Line
1.1 The glass loading, washing, lay-up, preliminary heating and preliminary pressing are centralized controlled by PLC, and the process can be accomplished by touch screen. The speed control method of the whole line adopts frequency conversion, centralized control.
1.2 The glass is picked up by mechanical automatic loading table, frequency conversion, and then feeds into the loading section of the washing machine at the same speed.
1.3 The Cleaning and Drying Machine with digital display is the one of the key parts of the production line. The rising and descending of the upper rubber roller, brush roller and air knife can be adjusted automatically according to the glass thickness, the result is digital display. The upper part can be wholly raised by 450 mm so as to easy to clean and maintain. The brush rollers are driven by two motors in the upper and lower part respectively. There are two hard brushes and one soft brush at the upper part, so low-e glass and coated glass could be washed with no damage to the surface. There are two pairs of air knives in the air-dry section. Cotton silencer and air intake filter are set in the air blower. It is characterized by large air flow, low noise and good air-dry effect.
1.4 The lay-up room is equipped with lay-up table, lifting universal wheel carrier, positioning air cylinder, PVB film Paver and scissor-type walking suction lifting frame so as to assemble glasses of big size or large quantity. Each single lay-up piece will automatically be delivered to the loading section of the prepress machine rapidly, and then regulates its own speed to be same as that of preliminary heating and pressing machine so that the room is available for the lay-up of next glass.
1.5 The three rolls of PVB films which could be wound and unwound electrically by PVB film paver should be laid horizontally. It is easy for operation and convenient for film's changing.
1.6 The preliminary heating and preliminary pressing machine is reasonable in its structure and convenient in operation. The main drive adopts frequency control and gear convey. The whole machine runs stably and reliably and centrally controlled in the lay-up room. The gap between the two pairs of big pressing rollers(Φ 360) both the front and back parts is adjusted by PLC with digital display. The limiting stopper of the upper pressing roller is adjusted by hard shaft drive so as to ensure the gap between two shafts is consistent. The MWIR heating tubes are distributed evenly in the heating zone. The temperature is zoning measured and the highest could be 250 centi-degree (adjustable).
1.7 Glass is unloaded by mechanical tilt table.
1.8 The infrared glass autoclave adopts PLC control, human-machine interface, safe and energy saving. The autoclave is equipped with video monitoring system inside, so its working situation could be watched.
II Technical Parameters of the Production Line
2.1 Max Glass Size: 2440mm× 6000mm
2.2 Min Glass Length: 420mm
2.3 Min Glass Width: 300mm
2.4 Glass Thickness: 4~80mm
2.5 The Total Length of the Front Equipments: 36290mm
2.6 The Total Power of the Front Equipments: 166.85Kw
III Composition of the Production Line
3.1 Automatic Mechanical Glass Loading Table
3.2 Glass Cleaning &Drying Machine
3.3 Automatic Preliminary Positioning Conveyor
3.4 Extendable Lay-up Table
3.5 Automatic Walking Suction
3.6 Automatic PVB Film Paver
3.7 Speed-adjustable Transmission Conveyor
3.8 Infrared-heating Preliminary Pressing Machine
3.9 Mechanical Tilt Table
3.10 Infrared-heating Glass Autoclave
Address:
Qinhuangdao Hebei Street, Wanzhong Plaza F-15, Qinhuangdao, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Qinhuangdao Lewei Company is a High-tech enterprise which specializes in developing and manufacturing infrared laminated glass production line. Our equipments have got CE approvals and they not only meet the requirement of the domestic market but also have been exported to many countries and districts including Europe, Africa, Mideast and South-eastern Asia, South America, etc. And been enjoying good reputation.
The whole line consists of Washing Machine, Lay-up Positioning Conveyor, Scissor-type/Automatic walking suctker, PVB film Paver, Transitional Conveyor, Infrared Pre-press machine and Infrared-heating Autoclave. PLC control system is adopted in the whole working process of our equipment, which makes the production line control easy and reliable.
Not only will we supply you with the highest quality product, we will also provide you with the best customer service you will find anywhere. All of our products come with a set of spare parts and one year warranty. During the warranty, we will help to install or debug your equipment, train your operators, and provide maintenance service for you.