Mowco Rock / Mineral Wool Products

Rockwool (Mineral Wool) board/ slab/ block:

A. High Strength - Compression Resistant Mineral wool Slab.
The high strength mineral wool slab, applies to the exterior of buildings for thermal insulation, like roof, external wall etc...Due to its property of compression resistance, it is suitable for steel sandwich panel's fabrication as well, and other industries where both insulation and mechanical strength are required.
There are various grades available, 30kpa, 40kpa, 50kpa, 60kpa etc. Properties: Comply with ASTM C 612 / JIS A 9504.

B. Rigid board
The product is suitable for large vessels, tanks, ovens and ducts for its good load-bearing property.
Board with wire mesh, kraft paper or aluminium foil facing is available.
They are water repellent and non-hygroscopic.
The wool is neutral or slightly alkaline, and normally not support the growth of molds, fungi and bacteria.

C. Flexible, semi-rigid board
The product is used in building walls/ roofs, elevator wells, flat or slightly curved surfaces and other industrial equipment for thermal and sound insulation.

Length (mm): 910, 1000, 1200, 1210;
Width (mm): 600; 605; 630; 910;
Other size or density on request.

Rockwool (Mineral Wool) blanket/ mat/ felt
It is the normal type, suitable for big diameter pipelines, flat and irregular surfaces, building walls with good thermal insulation and acoustic absorption effects.

The blanket with glass cloth, aluminium foil or wire mesh on facing is available.

B. Blanket with aluminium foil facing
The product is designed for circular ducts, small equipment and air-conditioning system pipelines, with properties of good water-resistance, dust-proof, and perfect thermal insulation.

C. Blanket with wire mesh
The product is used under conditions of strong vibration and high temperature, also recommended for thermal insulation of boilers, vessels, flanges/ valves and big diameter or large irregular pipelines.

D. Blanket with glass cloth Facing
The product is developed for large span equipment and building walls with good dust-proof performance.

Rockwool (Mineral Wool) pipe cover/ sections
The pipe covers are suitable for thermal insulation of piping works operating at service temperature 350C, and used in air-conditioning systems, flange and central-heating. Also be ideal for enhancing sound absorption of pipelines in conditions where liquids, air or solid particles are transported through the pipelines at high velocities.
Each section has a kerf for easy installation.

Availability:
Inside Diameter: 18 ~ 850mm; Thickness: 25 ~ 300mm
Length: 1000mm
Density: 100 ~ 150kg/m3 Pipe covers are no-combustible, and high water-repellent performance, non-hygroscopic
Rockwool is neutral (pH 7) or slightly alkaline. It will not normally support the growth of molds, fungi and bacteria