Spiral Wound Tube Type Heat Exchanger Coil Tube Heat Exchanger Steam-Water Heat Exchanger

Tengzhou MiYou Machine Co. Ltd
TGMIntroduction to the spiral wound heat exchanger

As a whole stainless steel welding screw thread tube heat exchanger, resistance to high temperature and high pressure:
Because the screw thread tube exchanger heat exchange controls and casing all stainless steel raw materials, has a uniform expansion coefficient, the maximum pressure of 1.6 MPa, the highest temperature resistant 400 ºC, not because of the pressure and temperature of heat exchanger resulted from the unstable deformation; Without reduction of temperature and pressure relief devices.
Average volume heat exchanger usually choose carbon steel shell, tube for copper tube. Expansion coefficient is different, because raw material is not the same as easily in the joint crack heat bilges cold shrink tube. Plus, mostly choose floating coil pipe coil oscillation, are more likely to break. For the late maintenance form very big trouble. Any other volumetric heat exchanger under pressure is low, high pressure to add desuperheating decompression device, not only make the initial investment cost to add, at the same time can form to steam heat desuperheating decompression device.
Shandong province is the birthplace of heat exchanger in our country, also is the base of the heat exchanger industry at present, there are large and small home to hundreds of spiral tube heat exchanger, has formed a in the spiral tube heat exchanger, spiral tube heat exchanger industry chain is enormous.
A close friend of spiral tube heat exchanger edge features:
 
1) we are on the spiral tube heat exchanger technology, manufacturing process is different from the others; All the spiral tube bundle of products, including accessories, has realized the standardization of design and production. Spiral tube heat exchanger before delivery to all of the pressure leak test, qualified only after delivery.  
 
2) low noise, small vibration, internal structure design considering the < rule of acoustic resonance allowable > (Eisnger criterion and rule of Bevins), effectively restrain the phenomenon of acoustic standing wave vibration and maximum limit the running noise, heat exchanger runtime almost no noise; To avoid the traditional heat exchanger sometimes instant outbreak of pulse noise and vibration.  
 
3) change, high thermal efficiency and the cooling effect and energy saving. Despite the small size spiral wound tube heat exchanger, but because of its unique spiral-wound curve, gaseous medium long residence time in the heat exchange tube bundle, condensing more fully, because of its cooling effect is good, do not need a second heat exchange.
 
 
4) scale tend to be low and easy to clean: spiral wound unique 100 ° Angle of connection of tube and shell heat exchanger and the screw thread structure and unique surface treatment technology, and on both sides of the counterflow heat exchange medium, realized the high flow velocity, temperature gradient is small, the characteristics of small dirt coefficient, low scaling tendency.
 
5) easy maintenance, save cost: material is made of stainless steel materials, corrosion resistance, can be used all kinds of water quality, and for all welded structure, maintenance free. The unique internal structure is not easy to scale, easy maintenance, each year can save a lot of the cost of maintenance.
 
6) small volume, easy to install: spiral tube heat exchanger and the traditional volume about 1/10 of the volume, small size and large heating capacity, whether it is a preparation for space and valves pipe diameter are greatly reduced, saving a lot of infrastructure investment.
 
7) is more suitable for high temperature and high pressure system: all adopt the stainless steel material, heat exchange tube bundle and shell with uniform expansion coefficient, not because of the pressure and temperature deformation caused by unstable heat exchanger; Heat exchanger in high temperature and high pressure, no desuperheating decompression device.
 
8) joint connection with German hydraulic expanded joint technique, combining closely, and firm, not leaking
 
9) stainless steel spiral winding bundle tube machine adopt the "CDI pipe-maling machine" in the United States.
 
10) fast return on investment, compared with the traditional tube and shell heat exchanger, spiral wound tube and shell heat exchanger can be put into use for about a year to save the cost to recover the heat exchanger equipment investment.
 
11) spiral tube heat exchanger shell adopts 316 stainless steel, the raw material and the casting quality and brand of top class line sync at home and abroad.

Know more details of the consultation: please call the following contact information
Contact: yu-lan zhang
Contact phone number; 155899236187
Machine; 0632-5955787
Fax; 0632-5912968
Address; Mountain provinces tengzhou economic development zone off west road no. 455