Power Source

Jump Starter for power

Instructions for use:
1. Select the appropriate voltage and connector for the electronic device to charge / power supply.
2. Press the switch to start charging when your device connected with IPOWER; If you unplug the cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by IPOWER and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-inbattery of IPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash
5. Press the switch five seconds to start If you want to use LED for illumination and select the status ( light, strobe, SOS, close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.

Special note:
To start 12V car, please make sure at least two LED lights of IPOWER are bright firstly, then connect the red battery clip to the battery positive (+) and black clip to the battery negative (-) and insert the plug into the IPOWER, finally turn the ignition switch to the START position. Once the car is started, please disconnect the plug and remove the battery clips immediately.

Product parameters:
Size: 7 * 3 * 15cm
Weight: 500g
Output: 5V/2A; 12V/2A; 19V/3.5A
Input: 12V/1A
Starting current: 200A
Peak Current: 400A

Product Highlights:
The smallest and lightest portable power with patented technology in the current market. Use 12000mAh high capacity high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times. Support 12V car for emergency start, portable illumination and various mobile phone, for PSP, MP3/MP4 Pocket PC PDA, notebook as well as other products charge / power supply; Multiple safety protection design to ensure the product has zero defect.

Part list: