Basic Info.
Model NO.
1.5kw ER11 Air Cooled Spindle set
Bearing Type
2 X 7002c P4 Dt and 2X 7002c P4 Dt
Spindle Clamping Bracket
80mm
Product Description
Spindle: 1.5KW ER11 Air Cooled
Basic parameters :
Size: 80x195mm(Middle body diameter:80mmxLength:195mm)
Material:stainless steel jacket, air jacket is 45 # steel, copper coil!
Speed ways: through the inverter output voltage and adjust the operating frequency can be achieved 0-24000 stepless
Cooling: Air cooling mode
Power Interface: Optional H16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground
Power:1.5KW
Voltage:220V
Current:7A
Frequency:0-400Hz
Speed:0-24000rpm
Runout off:less than 0.05mm
Diameter(mm):80
Bearing type:2 X 7002C P4 DT and 2X 7002C P4 DT
Collet:ER11
Clip knifediameter:3mm,3.175mm,4mm,6mm,7mm
Air Cooling ER11 collet chunk
Grease Lubrication
Main application: engrave for Wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,
duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,
aluminium,Pb etc soft metal surface working,but not milling working
Product Feature:
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function;
RS485 communication port, adopting standard international MODBUS main circuit control;
With extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability;
Carrier adjustable by 16KHZ, completely soundless working environment;
Broad voltage working area, normal running in 304V-456V;
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
With perfect error protection and short circuit starting protection capability;
Structural features :
High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature, improved support stiffness and live spindle grinding accuracy under high-speed rotation.
Spindle speed according to different uses can be high-speed grease and oil mist lubrication two ways.
Spindle speed rotation temperature rise caused by the use of coolant circulation system eliminated.
Care and maintenance :
Spindle frequency power supply connected rated voltage, frequency should be consistent with the technical parameters of the electro-spindle, spindle speed can be adjusted to change the frequency, and voltage is proportional to the change.
Spindle being not used, the application of compressed air to blow the pipes static coolant. To prevent rust, clogging water holes. Spindle appearance should be oiled. Plus the shaft protection device, put in a dry place.
To replace the spindle bearings, certain professional and technical personnel should be replaced. Supporting special tools, bearings should be replaced fully cleaned without removing the stator coils.
Inverter: 1.5KW 220V
Product Feature:
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function;
RS485 communication port, adopting standard international MODBUS main circuit control;
With extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability;
Carrier adjustable by 16KHZ, completely soundless working environment;
Broad voltage working area, normal running in 304V-456V;
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
With perfect error protection and short circuit starting protection capability
Tech parameters:
Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us for item stock.
Output Voltage 220VAC
Input Frequency: 48-63 Hz
Output Frequency: 0-400 Hz
Input Phase: 1 or 3 phase
Output Phase: 3 phase
Warranty: 1 year from the date you purchased
Advantage:
Control Mode is SPWM,it is very easy to use and convenient
Protection Functions are very strong,
Fin over-heat protection,
Overload Protection,
Fuse Protection,
Restart After Instant Stop,Stall Protection.
Powful function
Low price
Spindle Clamping Bracket: 80mm
Diameter :80mm
Material: cast aluminium
Features:
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth,.
Cast aluminium fixture is much heavier than aluminium profile fixture
Product Description:
Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity.
Usage:
Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error
Address:
Room 518 Building 7, Shuangying Guoji, Dong Fang Road, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Individuals/SOHO, Other
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000, EICC
Company Introduction:
Suzhou Penny Machinery Equipment Co., Ltd is a professional CNC Technology Company. We have boasting strong R&D strength and high quality service team, it can quickly provide customers with excellent products and efficient service, in the light of professional perspectives and rigorous attitude.
Since its founding, sticking to the corporate philosophy of "Specialized Concentrated Focused", we have always devoted itself to developing, producting and selling high quality CNC machine and parts. Now our productions are widely used in machining center, laser cutting, waterjet cutting, engraving&milling, mold making, advertising, glass and stone machining, etc.
Specialized: Provide perfect products by specializing in what we are adept in!
Concentrated: Satisfy customers by patiently listening to their opinions and demands!
Focused: Make innovations constantly by single-heartedly devoting to product R&D!
Integrity: Essence of values; Innovation: Soul of values; Pragmatism: Rule of values.
We believe every small act makes a differentce, together we can creat a better world!