Pb Balance Digital Battery Charger (100009)

AC input: 100-240Volt
DC input: 11-18Volt
Circuit power: Max. Charge power 50W
Max. Discharge power 5W
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300mA/cell
NiCd/NiMH battery cell count: 1-15cells
Li-ion/Polymer cell count: 1-6cells
Pb battery voltage: 2V- 20V
Net weight: 645g
Dimension: 145x134x40mm

Charger with built-in AC adapter - use at home and at the field
Dual Power multi-use charger for 1-6 Li-ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs.

Internal independent lithium battery balancer:
Employs an individual-cell-voltage balancer to maintain your pack in balance while charging.
Balance individual cells during discharge:
During the discharge process, B6-PRO can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal.

Fast and Storage mode charging:
"Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack.

Charges various types of LiPoly cells:
Includes charging programs for LiFe (A123), Li-ion, and LiPo battery types.
Data store/load:
Up to 5 batteries' data can be stored for easy programming.
Cyclic charging/discharging: 1-5 cycles of either charge>discharge or dischage>charge is possible.