Ce Approved Landscape Fogger Maker Ultrasonic Mist Maker 10 Head

Runyang hot sale 7kg 10 head copper mist maker ultrasonic atomizer with power supply

Best water level: The atomizer shell plane is 3.5-4cm below the water surface, or the top of the column is 1-1.5cm below the water surface.

For your products long life and good effect, please read below insruction:
1.  The mineral will build up on the shell or film after a long time service. It will affect the long life & fog. We advise that you had better clean the mist maker each half an month. You can use soft cloth with alcohol. Do not use any hard cloth for scrath mist maker or film.
2.  Water quality will affect the long life of mist maker. We advise you that used clean water.
3.  After long time service (3000 hours),the film life will be shorten, the atomiztion will less. Like this, please replace the film.
4.  Please choose Input DC46±2V, Rate: >300W. Cannot be connected to 220V directly.
5.  Do not damage water level switch in install, the water level switch will out of order if damaged.
6.  Do not put the hand over the mist maker when working.
7.  Do not let mist maker working out of water, please put the mist maker in water before power on.
8.  Please turn off the power before take out the mist maker from water.

Replace film as follows:
Power off first. Take out the atomizer from water and upside down the mist maker. When the water come out from mist maker, use dry cloth clean the mist maker.Use tool open the end ring and take out the film and put in the new film.