Organosilicon Water-Proofing Agent

The United States dow corning organic silane/emulsion or transparent liquid
Product features:
This product is a highly effective natural infiltration waterproofing agent, silane micro via surface infiltration base material with water molecules and acid and alkali substances react to produce the deep surface hydroxyl group. Hydroxyl group and base material to form a permanent waterproof layer, effectively restrain substrate ooze water, get damp, to prevent the concrete reinforcing steel bar caused by water seepage rust expansion cracking. To make up the base material crack and its permeability, maintain the appearance of the substrate of the original. Uv resistance, freezing resistance, excellent high temperature resistance, chloride ion resistance, alkali resistance ability, repelling water effect significantly for a long time. New base material high alkali content will speed up chemical reaction product and substrate, so new buildings without maintenance, table dry can do waterproof processing.
Product features:
1. Waterproof, mouldproof, anti-fouling, surface coating film, do not change color.
2. With uv resistance, freezing resistance, high temperature resistant, acid resistant ability.
3. The permeable base material is not blocked wool stoma, have air permeability.
4. Environmental protection product, tasteless non-toxic.
 
Scope of application:
1. Used in cement, gypsum, clay, ceramic tile, tile and waterproof surface treatment of all kinds of insulation materials and other products, you may also apply directly after mixing to basic material in the stirring inside.
Common applicable occasions:
1. Has been completely installed in the bathroom, shower room, kitchen floor and walls seepage;
2. Ceramic tile, floor tile, bo changes a brick, brick crack ooze water, such as Mosaic, gravel, terrazzo, etc;
3. Due to the waterproof wall do not make or effect is poor, cause indoor metope of be bored with child weeping;
4. Before the wallpaper metope waterproof processing;
5. The balcony, roof, pool, swimming pool, outdoor base ooze water treatment;
6. Cement floor waterproof processing;
7. Mixed in cement, applied to tile.
 
Method of use:
1. The substrate surface clean and dry, no stain. Spray, besmear again evenly coated, absorb to wet state.
2. Do not wet water natural air drying, completely cured 24 hours can produce excellent repelling water effects.
3. Use the most widespread of 10 bungalow meters per liter (depending on the nature and the base material density decision final dosage).
4. The dosage of mixed materials for weight of 2-6% can be made according to the characteristics of substrates (final dosage small sample test), stir in makings of direct water blending with water.