Basic Info.
Nature of Source Flow
Charge
Product Description
Product overview
DWC series wind power charge controller is designed for small wind power development of the latest charge controller, it has smaller size, easy to install, the use of aluminum profiles, can be very good use of shell cooling, further to the high integration and miniaturization, the new generation of controller with charging instructions, manual brake and other functions, to meet the actual needs of more customers.The circuit uses the parallel type unloading design, can better protect the wind turbine and the battery, the components adopt pure imported IR integrated chip and power components.Advanced design, high quality imported components is a strong guarantee for product stability and reliability.
Product features:
♠ Wind power charge controller
♠ 12V/24V/48V Automatic recognition technology
♠ Three phase soft brake technology, more perfect protection of the wind turbine
♠ Manual brake function, emergency case, ensure system security
♠ New battery back protection, more adapted to the use of the field conditions of the multi variability
♠ Work,Charge, Charge-full of LED status indicator, more intuitive display
Electrical connection
NOTE:
When see the controller, please sure there is no damage.If have , please contact the supplier in time.
2,Select the corresponding working voltage of the battery, the correct connection and positive and negative pole, is strictly prohibited!
3,Connecting the conductor of the wind turbine, the three line of the wind turbine is not in order.
4,The controller manually switch to the "Run".Charging system will be running.
Wiring diagram:
1 'a' is Controller terminal connection diagram.
Digital description:
'1' is the positive and negative electrode of the battery,This controller is equipped with battery anti-reverse connection function,If the battery is positively negative, the controller will not have any display,When the battery is properly connected, wait about 10 seconds and the controller CHG/Break indicator will flash.
Flicker times and corresponding battery rated voltage refer to the table below:
NO. | Flicker times | Rated Battery voltage | Identification Range |
1 | 3 | 12V | Battery voltage≤17V |
2 | 4 | 24V | 17V<Battery voltage≤35V |
3 | 5 | 48V | 35V<Battery voltage≤70V |
'2'is the green LED,when the system is working,LED will be lit.
'3'is the CHG/Break LED,when battery will be charging and the current more than 1A,the LED will be GREEN,and if the battery Charge-Full or switch is on"Break"or the controller temperature over 70ºC the LED will be RED..
'4'is emergency switch,the switch is on 'Break',the system is in an emergency breaking state,as the same time the CHG/Break LED will be RED.The switch is on 'Run' site,the controller is in normal charge state.
'5'is the connecting end of the wind generator which is connected with the three wire of the wind generator in turn, such as the direct generator or the single generator, will be connected with two of the three terminals.The controller is compatible with the market on the three-phase, single-phase and DC wind generator.This controller has a simpler operation.
Main technical parameters
Model | DWC0615A |
DC rated voltage | 12V/24V/48V |
Battery over-charge voltage | 15V/30V/60V |
Rated Current | 15A |
Temperature-compensation | 8mV/ºC/2V -20~65ºC |
Working environment temperature | -20~+55ºC 35~95%RH(Without Condensation) |
Storage environment temperature | -30~+65ºC |
Altitude | ≤5500 M |
Protection | Battery anti reverse,Over-charge protection,Lightning,Current-limit,,Over-temperature,automatic and manual brake. |
N.G | 0.5kg |
Size | 156*100*51mm |
In order to serve our customers better.Our company can adjust parameters configuration according to customer's requirement. |
Troubleshooting
Phenomenon | Check sequence | Treatment method |
Wind generator stop rotating | Check battery whether charge full or not. Check the controller whether in manual breaking state. Check the controller whether automatic braking. Check the resistance value of wind generator's output | If the battery is full the state is right, else connect manufacture. If the controller is in manual breaking state please make controller is in running. If yes, the wind generator state is right. If have one or more value is less 0.4ohΩ, the wind generator is short circuit, please check it now. |
Not charge | Check all cable terminal connection 2.Whether there is no wind or the wind speed is low 3.Check the controller input voltage of wind. | Whether connection is not strong, fastening. If yes, it is right. If low or the voltage is not same there is an overhaul on wind generator. |
Warranty card
The machine has pass strict inspection to ensure well quality before delivery.Our company assurance the machine with good performance and the mechanical integrity.
The machine have 1year warranty when sales,removal-self and violation of the operation(not by manual)and failure,not within the scope of the warranty,but in us specified point of sale to charge,will be collected the cost of maintenance.
the machine without warranty,will be the low cost price guarantee.
As a product of the product sold, please keep it properly.
Address:
No. 399 Meishan Road, Ma′anshan, Anhui, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Tools & Hardware, Transportation
Company Introduction:
AnHui ST TECH Co., Ltd.Is located in College Zone, Scientific and Innovative Center business park, Ma Anshan City, Anhui Province.Company is engaged in new energy supply facilities and related mechanical and electrical product development, design, production of science and technology enterprises.Combination of the company, with many national invention patents.Companies engaged in new technology, new product research and development account for 60% of the total number of employees, all have bachelor degree or above.Company was established in May 2008, the company′s main technical backbone is the special power of Anhui University′s technology research, long-term commitment to the power electronics research, development and application of a number of national patents.Baosteel Yichang Sheet Co., Ltd., Shanghai enthalpy Electric Co., Ltd., Maanshan Dingxing Industrial Co., Ltd., Maanshan power plant, Ma An Shan Di Le PU Electronics Co., Ltd., Shandong Wenshang scenery Electronics Co., Ltd., Shanghai Optoelectronic Technology Co., Ltd.Jing Heng units to develop, produced high-performance sine wave inverter, AC-DC power supply, UPS, inverter power supplies, industrial control systems supporting power supplies, has a very extensive product development and production experience.