Basic Info.
Nichia 3W 365nm of Ncsu033b(T)
Good
Product Description
SUNLONGE AT069-UV uses Nichia 5 Watt 365nm
Use in Applications such as NDT INSPECTION and UV CURING. Lamp: 5W 365NM UV LED, Runtime (high): 2.5 hours
SUNLONGE AT069-UV UV LAMP INTENSITY:
50000uW/cm2 at 15cm
35000uW/cm2 at 38cm
9500uW/cm2 at 61cm-------at38.1cm
Specification
Use in Applications such as NDT INSPECTION and UV CURING.
Lamp: 5W 365NM UV LED,
Runtime (high): 2.5 hours, SIZE: 145mm * 45mm * 25mm,
Weight: 160g (without batteries)
UV source: 365NM NICHIA of NCSU033B(T)
Intensity: >35000 μw/cm2 at 38 cm (15 inches)
50000uW/cm2 at 15cm
9500uW/cm2 at 61cm
Wave length: 365 nm
Distribution angle (beam): Spotlight
The centre of the light beam is 30 mm (1.2 inches) Ø
The whole light beam is 50 mm Ø , at a distance of 38 cm (15 inches)
Battery for the SUNLONGE AT069-UV
2200 mAh Lithium-Ion, 3.7 V
Running time: Approx. 3 hrs
Charging time: Approx. 8 hrs
SUNLONGE AT069-UV Torch Kit comes with:
UV LED Torch Light.
Charger for use from electrical outlet.
Charger for use in vehicle via cigarette lighter.
Connection.
Belt nylon bag.
Application:
Penetration testing, fluorescence detection
Biopolymers, fluorescence observation
Refrigerant leak detection
Engine oil leak detection
Criminal Investigation: Fingerprints, blood observed
Fluorescence observation of ore, Detection of oil cleaning
Main purposes:
Fluorescence detection: Iron and steel, non-ferrous metals, automobiles, aircraft, fluorescent penetrant inspection, fluorescent magnetic particle inspection
Pollution check: Electronic components, boards, dust inspection, LCD panel, checked into the clean room
Leak Check: Hydraulic machines, sump, pipe and other oil spill inspection, leak detection using fluorescent agents
Degreasing cleaning validation: The food industry, kitchen, cooking utensils, tableware degreasing cleaning
IMPORTANT SAFETY INSTRUCTION
1. Read all instructions.
2. Do not operate the flashlight if it has been damaged.
3. The AT069-UV 365 must be fully charged before first use.
4. Caution: Use only the battery charger packed with the flashlight. Do not attempt to use the charger to recharge any other product.
5. Use only the We provide the battery batteries
6. The AT069- 365 is not approved for use in hazardous atmospheres. Do not attempt to use it in areas requiring explosion-proof lighting.
7. Never use this equipment in any manner not specified in these instructions, because your protection may be impaired
CHARGING AND USE
The AT069 flashlight comes equipped with a battery chargeravailable in several different voltages.
1. Fully charge both batteries before first use.
2. Place the batteries in the battery charger cradle. The light on each battery, charger will show green when charged, and red when the battery is low. A ull charge for the batteries will take approximately 6 hours
3. Turn the knob on the bottom of the flashlight to open the battery compartment. Insert one Li-on battery, positive end down, and close the compartment
4. AT069- 365 UV flashlight of the line design and The charger has special functions, it has polarity protection function( if you put the battery inside the aluminum cylinder with wrong polarity, the charger and flashlight can not explode. It's very safety. ).
5. Turn the knob on the bottom of the flashlight to open the battery compartment. Insert one Li-on battery, positive end down, and close the compartment.
6. The flashlight will operate for up to 2.5 hours on a fully charged battery, Press the switch to light and use the AT069-UV.
Address:
168 Zhongxing Road, Luohu District, Shenzhen, Guangdong, 518001 China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Lights & Lighting
Company Introduction:
HK Sunlonge INT′L Co., Limited established in 1999,Headquartered is in Hong Kong and set factories in mainland China, and we have own R&D team. HK Sunlonge INT′L Co., Limited is a manufacturer and suppliers of NDT and special lamps,Our products have UV NDT Lamp,UV Leakage Detection LAMP,Portable Multi-channel Light Source, Ultrasonic Flaw Detector, Ultrasonic Thickness Gauge,Leeb Hardness Tester,and so on.
Our customers as our partners, together provide a comprehensive solution transaction processing product procurement, negotiation, implementation of appropriate packaging and brand image promotion. "Customer demand for orientation, mutual benefit" is our principle, and we sincerely hope to establish long-term business relationships with interested parties, anywhere in the world.