Basic Info.
Application
CT PT CVT Circuit Breaker
Product Description
1,Main Parameters
Rated Voltage:72.5-800KV
Specific Creepage Distance:20---31MM/KV
Internal Pressure Failing Load:1.5---6.0Mpa
Cantilever Failing Load:10---280KN.m
2,Application Guide
High voltage porcelain insulator is applicable in the electric equipments of the substation whose AC power frequency rated voltage are between 72.5-800kv.And it is the main element of high voltage equipments and used for supporting, voltage withstand, container, insulation and connection for them
Altitude:≤1000m: Products Used in High Altitude Area≤4000m.
Ambient Temperature :-40ºC--+40ºC
Pollution Degree:III,VI
3,Reference Standards
GB/T772 Technical Specifications of Porcelain Element for High Voltage Insulators
GB/T775.1-3 Test Method for Insulators
JB/T7844 General Technical Specification for Porcelain Insulator with Internal Gas Pressure
IEC60233 Tests on Hollow Insulators for Use in Electrical Equipment
IEC60815 Selection and Dimensioning of High-Voltage Insulators Intended
IEC62155 Hollow Pressurized and Unpressurized Ceramic and Glass Insulators for Use in Electrical Equipment with Rated Voltages Greater than 1000 V
4,Product Feature
We factory mainly manufacture SF6 Circuit Breaker Post insulator, SF6 GCB Circuit Breaker Insulator, GIS Outlet Insulator, Current Transformer Insulator, Potential Transformer Insulator, Cable Insulator and Capacitance Bushing Insulator whose rated voltage are between 72.5-800KV.
Insulators applicable for high voltage equipment can meet the specification in both mechanical strength and thermal stability. The high-strength porcelain formulation self-developed in the production can comply with the requirements of C-130 and C-140 in IEC 60672. According to the requirement for the tightness of high voltage equipments, our insulator adopts a new process which is cutting and mulling once to assure the precision of the products. Each product has the routine tests of internal pressure, four-direction cantilever and ceramic wall pressure withstand according to the requirement of the customer.
1,Основные параметры
Номинальное напряжение: 72,5-800 кВ
Удельное расстояние утечки: 20 --- 31 мм/кВ
Внутреннее давление при отказе нагрузки: 1,5 --- 6,0 МПа
Консольная нагрузка при отказе: 10 --- 280 кН.м
2. Руководство по применению
Фарфоровый изолятор высокого напряжения применяется в электрооборудовании подстанций, номинальное напряжение сети переменного тока которых составляет 72,5-800 кВ. Он является основным элементом высоковольтного оборудования и используется для поддержки, выдерживания напряжения, контейнера, изоляции и соединения для них.
Высота над уровнем моря: ≤1000 м: Продукты, используемые на большой высоте: ≤4000 м.
Температура окружающей среды: -40ºC---+40ºC
Степень загрязнения: III, VI.
3. Справочные стандарты
GB/T772 Технические характеристики фарфорового элемента для изоляторов высокого напряжения
GB/T775.1-3 Метод испытаний изоляторов
JB/T7844 Общие технические характеристики фарфорового изолятора с внутренним давлением газа
IEC60233 Испытания полых изоляторов для использования в электрооборудовании
IEC60815 Выбор и расчет предназначенных высоковольтных изоляторов
IEC62155 Полые керамические и стеклянные изоляторы под давлением и без давления для использования в электрооборудовании с номинальным напряжением более 1000 В.
4. Характеристики продукта
В основном мы производим изоляторы для столбов выключателя SF6, изоляторы для выключателей GCB SF6, изоляторы для розеток GIS, изоляторы трансформаторов тока, изоляторы трансформаторов напряжения, кабельные изоляторы и изоляторы емкостных втулок, номинальное напряжение которых составляет 72,5-800 кВ.
Изоляторы, применяемые в оборудовании высокого напряжения, могут соответствовать техническим требованиям как по механической прочности, так и по термической стабильности. Высокопрочный фарфоровый состав, разработанный самостоятельно при производстве, может соответствовать требованиям C-130 и C-140 стандарта IEC 60672. В соответствии с требованиями герметичности высоковольтного оборудования в нашем изоляторе используется новый процесс резки. и обдумывая один раз, чтобы гарантировать точность продукции. Каждый продукт проходит стандартные испытания на внутреннее давление, четырехнаправленную консоль и устойчивость к давлению керамических стенок в соответствии с требованиями заказчика.