Anti-Vandal Standalone Controller & Reader with Metal Shell and Backlight

Anti-Vandal Standalone Controller & Reader with Metal Shell and Backlight

Model Name: JAC117

Product Profile
The product is a metal cased, anti-vandal, 1200 users standalone controller, with built-in proximity card reader module and keypad. It is ideal for high traffic and extremely harsh environments, the unit is fully sealed, epoxy filled and has advanced programming options as well as flexible operation models. The unit accepts up to 1200 users and provides entry via the user of proximity cards and/or PIN codes.
The proudct has strong functions and advantages such as low power consumption, keypad with blue backlighting, independent passwords, standard prox + PIN code keypad wiegand output, the output short circuit protection, Tamp alarm, exit button, the doorbell interface, etc., which is widely used at home, office, residential area and other public places.

Features
A) Standard alone controller:
1) 1200 users capacity
2) door release time adjustable from 1 to 25 s
3) open door with 3 models: PIN only, Prox only and Prox+PIN
4) enrol/delete card by keypad, or master card
5) delete card by input card number from keypad directly
6) optical Tamp detection and buzzer alarm function
7) blue backlight LED for keypad

B) Standard alone secure controller:
Controller is with an external wiegand26 reader input interface, So unit can be installed inside with an external proximity card reader or keypad installed outside of the region to make controller system much securer.

C) Keypad + Prox reader
Unit is with standard wiegand output interface, So it works as a standard keypad + Prox. Reader. Once card is detected, the card number will be sent via wiegand interface, Once any key is pressed, the key value will be sent via wiegand interface
D) Tamp and bell function
Tamp alarm: When unit is installed well, the optical tamp CDS is in high resistance status and the Tamp output (Pink wire) is in high level, when tamp alarm is active, unit will sound alarm beep and Tamp output (pink wire) will go to low level as notification
Bell key: When Bell key is pressed, the bell output wire (pink wire) will output a lower pulse, to active door bell sound

Technical Specification
Wide Range Operating Voltage Range:
7 to 30V DC From a Regulated Power Supply
Maximum Input Current:
Standby: 30mA Not including attached devices
Max: 100mA Not including attached devices
Relay Outputs:
Door Relay Form C, 3A/30VDC
Inputs:
REX for door, N. O., Dry Contact
Wiegand interface for external reader or keypad input
LEDs
Two Tri-colored LEDs
Blue backlight keypad LED
Tamper alarm function
Optical tamper detection output
Built-In Proximity Reader
Read Range 4-10 cm, Modulation ASK at 125kHz
Compatible Cards All EM Cards (HID or Mifare version are also available)
Operating Temperature: -22 F to 150 F (-30 C to 65 C)
Operating Humidity: 0 to 95% (Non-Condensing)
Suitable for outdoor use. (IP 65)
Dimension: 120mm L x 58mm W x 20mm D
Weight: 500g
Equipment provided

The following is provided as part of every package:
- main Access Control Unit.
- Installation Kit
- Installation and Operating Instructions