Water Treatment (UF-8040)

The membrane filtration is the membrane separation technology with the porosity configurations. And the separation is for the Macromolecular of the Substances in the liquor.

The membrane filtration process is the liquor separation (based on the principle of the Mechanical screening) with the drive power from the two sides of the UF modules pressure differences. Operational pressure range is 0.1~0.3MPa, pore size range is 0.05~0.2μ M, MWCO with approx 50~1000KD.

The difference between normal filtration and pore filtration:
1. Small pore size and almost cutoff all of bacteria, heat source, virus, colloid atom, protein and Macromolecules organic.

2. The membrane pore size, Dissolved particles size and form( soft or strong), liquor chemical characteristic(pH etc) and element, and so on. All of them will affect the membrane separation.

3. There is no block material and less accumulates on the membrane surface during the treatment process, and the speed of filtration will get the balance no continuous attenuation in the stable situation. But the cutoff rate of modules will be low when treat the macromolecules organic liquor.