Basic Info.
Type
Electronic Boundary Control
Product Description
Hot sele pet training supplies electronic wireless fence
number | Product Description |
1. | Wireless Pet Fence System |
2. | 4 different distances adjustable |
3. | Radius Max to 300 Meters |
4. | Rechargeable Collar Receiver(300mAH) |
5. | Night reflective yarn TPU Strap |
6. | Waterproof and rechargeable receiver collar |
7. | Warning Tone + Shock Stimulus |
8. | Available Plug: US,EU,AU,UK |
9. | Multi collar receivers are supported by one transmitter |
Introduction:The wireless pet fence is the newest product in the market, it's easy for operating.
It can be used on a table or outside and it is effective to train pet developing good abits.Main Characteristic:
LED display distance,Five Levels signal fence distance(According to the environment,
there will be a gap of ± 16ft/5M )
30=30 meters~98ft, 60=60 meters~196ft, 90=90 meters~295ft
150=150 meters~492ft, 300=300 meters~984ft
2. The transmitter (lithium battery) and the receiver can be charged, and the receiver is waterproof.
3. No need to pairing between transmitter and receiver, the device can accept signal to work after turning on.
4. One transmitter can connect up to 5 receiver .
5. Reflective fluorescent TPU collar, improve the safety at night.
6. Use with silicone sleeve to prevent pets from directly touching the metalHow to Test:Before using, please connect the power supply (or fully charged) and use the following method to confirm whether it works (Shock test need use the LED Test Light Tool).
n After Power on the Transmitter and Receiver, then power off the transmitter, the receiver
will launch bi-bi-bi always.Working Principle:1. Receiver will not work among setting distance, will work as below when exceed the range.
2. When dog not in the range, Receiver working modes as below: 1--2--3,(indicator light flashing)
1). Sound 5 seconds
2). Shock 5 seconds
3). Sound& shock at same time for 6 seconds
3. After 2 cycles of working modes, it will launch di-di-di sound always emitted until the dog returns
to the set distance.
4. After 5 minutes of static, it will enter standby mode.Using guide:
Support up to 5 dogs with a maximum straight radius of 990ft, centered on the launcher. When dog exceed the setting range, receiver will start working mode automatically. (refer to the working modes at "Working Principle" ). Please keep the Transmitter always power on, if not, the receiver will go to working mode,
shock your dogs two times, and bi-bi-bi always.Receiver using guide
Receiver is water proof and rechargeable, the metal probes can be replaced according to dog's hair length. Receiver static for 5 minutes, to sleep. Touch or move the receiver , it will be awakened. Press power button 1 second, receive will be turned on, power light will be on always,
Press power button gently, receiver will be turned off.
LED testing light used for testing shocking, testing light on means shocking function is working.
can be used as wrench to fix metal probes. Charging:Only for charging transmitter battery,
1. Transmitter is rechargeable with DC 5V, 2500mah lithium battery, LED will display 000 flashing
When low battery, please charge in time, usually 4-5 hours for full charge. After full charge,
the red light will be on always, please use the original charger.
Receiver is rechargeable with 5V 400mah lithium battery, taking 1-2 hours for full charge and
then be used for about 500 times. Receiver 5V low battery
reminder: indicator light flashing, please charge in time, after fully charged, the green light will be on.Attention:
It will affect distance and using when low power.Please keep the Transmitter always power on, if not, the receiver will go to working mode,
shock your dogs two times, and bi-bi-bi always.
Product color: black
Transmitter size: 120*80*29MM
Receiver size:68*41*40MM
Color box size:28.9*14.5*5.5CM
QTY:16PCS/CTN
MEAS:45*30*31CM