Basic Info.
Model NO.
K350QVG-V1-F/ FS-K350QVG-V1-F-04
Product Description
1. 3.5" (Diagonal) Standard LCD Module
2. With 4-wire resistantive Touch Panel
3. 320xRGBx240 Dots
4. 262K colors TFT LCD module
5. Wide working temperature (-20 C ~ +70C)
6. White LED backlight
7. With Controller IC: SSD2119
8. 8-bit or 16-bit 8080 system interface, SPI, or parallel RGB interface
9. With internal voltage booster
10. Logic voltage: 3.3V (typical)
11. Outline dimensions: 76.90(W) x 63.90(H) x 4.40(D) mm
12. View area: 72.88(W) x 55.36(H) mm
13. Viewing Direction: 12 o'clock
1-2 | LED_K | Power supply for LED backlight |
3-4 | LED_A | Power supply for LED backlight |
5 | GND | Power supply (system ground) |
6 | XR | Terminal of touch panel. |
7 | YD | Terminal of touch panel. |
8 | XL | Terminal of touch panel. |
9 | YU | Terminal of touch panel. |
10 | GND | Power supply (system ground) |
14 | RESET | System reset pin |
15 | CS | Chip select pin |
16 | SPCLK | Clock pin of serial interface |
17 | SDA-SDI | Data pin of serial interface |
20-25 | B[0-5] | Blue data 6-bit/18bit bi-directional (D0-D5) |
28-33 | G[0-5] | Green data 6-bit/18bit bi-directional (D6-D11) |
36-41 | R[0-5] | Red data 6-bit/18bit bi-directional (D12-D17) |
42 | HSYNC | Line synchronization signal input |
43 | VSYNC | Frame /Ram synchronization signal input |
44 | DCLK | Dot clock signal |
45-46 | AVDD | Supply voltage for lcd driving |
47-48 | VCC | Supply voltage for logic |
49 | DC | Parallel Interface |
50 | RD | I80 system: Serves as a read signal and reads data at the low level. |
51 | WR | I80 system: Serves as a write signal and writes data at the rising edge. |
52-55 | PS[0:3] | Interface selection pin PS3 PS2 PS1 PS0 Interface mode 0 0 1 0 16-bit 8080 parallel interface, D[17:10]&D[8:1] 0 0 1 1 8-bit 8080 parallel interface, D[8:1] 0 1 0 0 9-bit RGB(262 colour) + 3-wire SPI, D[8:0] 0 1 0 1 16-bit RGB(262K colour) + 3-wire SPI, D[17:10]&D[8:1] 0 1 1 0 18-bit RGB(262K colour) + 3-wire SPI, D[17:0] 0 1 1 1 6-bit RGB(262K colour) + 3-wire SPI, D[8:3] 1 0 1 0 18-bit 8080 parallel interface, D[17:0] 1 0 1 1 9-bit 8080 parallel interface, D[8:0] 1 1 1 0 3-wire SPI |
56 | WSYNC | Ram Write Synchronization output |
11-13 18-19 26-27 34-35 57 | NC | No connection |
58 | OE | Display enable pin from controller |
59-60 | GND | Power supply (system ground) |
Pin No. | Symbol | Description |
| | |
Address:
Room 20c, Haidianju, Nanhai Avenue, Nanshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting
Company Introduction:
Kitronix Display (H. K. ) Limited′s headquarter is located in Hongkong and is founded in 2006. Our team is professional in the design, development and manufacturing of LCD display modules for more than 20 years. Over the years, we dedicated our best to the Total Quality Management philosophy and give customers′ reasonable prices. That′s why our LCD modules are very popular in the market. We hope to provide more valuable products to the customers and get the biwin results with customers!