FD-2000 Guard Against Theft Switch

MODEL FD-2000 guard against theft switch use human body infrared thermos sensor to detect come from robber move target to send out infrared radiation. When a robber come into detect area, (130"/6M)sector area transversely certain visual field commit an offence. Thermos electricity component emits electricity signal. After enlarge compare to drive no contact point switch transmit, If load alarm bell or give an alarm material phonation, posse will arrive scene capture robber in time. After sort out scene last three minutes, this switch again come into normal Patrol State.

Major Technical Index:
1) Input task voltage: AC220V+(-) 10-15% 50HZ 2)Switch input voltage: AC110V~130V 50HZ
3) Switch load capacity: specified load150W(restrain)
4) Detect distance: More than 6 miles.(+25C, when relatively humidity less than 95%)
5) Visual field area: 130"
6) Warning continued times: About three minutes.
7) Shape size: 86x86x23.8mm
8) Install height: 1M-1.5M ( on the wall )
9) Guard work time: After turn on power supply all-day.

Installation and use method:
1) Install method: Installs this switch can install cautionary hideaway or corridor neighborhood that needed, non-easy found by a thief on more secret wall. General power supply switch park orderly room or easy pilot place. Particular wiring diagram as follows:
2) After switch on power supply switch, alarm bell(or siren)shall ring three sounds to come into normal protect state. Until install staff leave its visual sense area, it will last three minutes. It can auto come into Patrol State.
3) Use method: If a factory's workers come off work, posses inspect main switch of portals and windows. The posses are prepared of rest,or the outgoing family and prepare of retire for the night. When you require this switch work, please unfold switch power supply.(Pay attention to this switch of power supply assemble wire should install orderly room of illuminative circuitry. It shouldn't juncture on factory' s power circuitry)This switch will auto carry out protecting detect for you.

Notice proceeding
1) When install this switch, you need avoid sun direct irradiate explorer. You should avoid place with a draught or central heating and the others warm source prevents disturb.
2) The power supply of this switch control(over control) must install near posse or park near gatehouse's illuminative circuitry to prevent thief from switch off power supply.
3) This switch should park courtyard general gate that thief facility in and out major channel. You can put near strongbox, confidential room, monument room importance place and so on. General power supply pilot warning system must install on two sides, so either can scare thief or can clue to guard.