Hatch Cover Tape

The waterpoof tape is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the base covered with a release sheet,keep the self-adhesive flexible waterproof. The product has a good self-adhesive and bending properties. construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works. 
Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.
 
Product Features: 
Self-adhesive modified bitumen membrane with a self-adhesive surface of the waterproofing, sealing material, divided into a fetal self-adhesive and non-self-adhesive two children. Since a child, the child folder since the middle of viscose composition, surface overlying membrane for ethylene, for the next review of the peelable from silicone membrane. No child from the self-adhesive glue, and the next film on ethylene combination of silicone membrane.     

Installation Instructions:
· Before applying the Cover Tape, clean the surface to which it is to be applied thoroughly and make sure that the hatch cover
is free of any dust or spray.
· The surface must be dry before tape application.
· In cold weather conditions use a torch to heat up the tape to achieve a better adhesive performance. The flame should be
applied to the black surface after removing the release liner. Be careful not to use the torch in a fire danger areas.
· Immediately after heating apply pressure to stick the tape onto the surface before the tape cools. This which will ensure
optimum adhesion.