Specification |
Product Type: Lump;
Material: FeMn;
Carbon Content: Low Carbon &Med Carbon &High Carbon;
PCD: as Your Requirement;
Color: Silver Gray;
Application: Cast Iron;
Purity: 75% 80% 65%;
|
Product Type: Wire;
Material: Nicr;
Carbon Content: -;
PCD: -;
ET: -;
Hole: -;
Density: 8.4;
Melting Point: 1400;
Resistivity: 1.09;
Other Nichrome Alloy: Ni70cr30, Ni60cr15, Ni35cr20, etc;
Advantages: High Resistance, Good Corrosion Resistance;
Application: Resistors, Furnace, Electric Glass Top;
Min Elongation: 20%;
Max Continuous Operating Temperature: 1200;
Type: Annealed, Cold Drawn;
Surface: Bright, Without Spots;
OEM: Yes;
Stock: Seyn;
Sample: Free;
|
Product Type: Rod;
Material: Tungsten Carbide;
Carbon Content: Low Carbon;
PCD: 98mm;
ET: 35mm;
Hole: 5;
Features: Wear-Resisting Long Life;
Application: Carbide Body for Drill Bits/ Endmills / Reamers;
Service: Customize ODM OEM;
Advantage: High Rigidity & Durable;
Size: Per Your Requirement;
Grade: Yg10X, Yl10.2, Yg6X;
Model No.: Yl10.2 Carbide Rod, Tungsten Carbide Drill Rods;
Hardness: >91.5 Hra;
Length: 50~500mm;
Surface Finishing: H6 Tolerance;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Wc+Co Powder: 100% Virgin Material;
|
Product Type: Rod;
Material: Tungsten Carbide;
Carbon Content: Low Carbon;
PCD: 98mm;
ET: 35mm;
Hole: 5;
Features: Wear-Resisting Long Life;
Application: Carbide Body for Drill Bits/ Endmills / Reamers;
Service: Customize ODM OEM;
Advantage: High Rigidity & Durable;
Size: Per Your Requirement;
Grade: Yg10X, Yl10.2, Yg6X;
Model No.: Yl10.2 Carbide Rod, Tungsten Carbide Drill Rods;
Hardness: >91.5 Hra;
Length: 50~500mm;
Surface Finishing: H6 Tolerance;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Wc+Co Powder: 100% Virgin Material;
|
Product Type: Rod;
Material: Tungsten Carbide;
Carbon Content: Low Carbon;
PCD: 98mm;
ET: 35mm;
Hole: 5;
Features: Wear-Resisting Long Life;
Application: Carbide Body for Drill Bits/ Endmills / Reamers;
Service: Customize ODM OEM;
Advantage: High Rigidity & Durable;
Size: Per Your Requirement;
Grade: Yg10X, Yl10.2, Yg6X;
Model No.: Yl10.2 Carbide Rod, Tungsten Carbide Drill Rods;
Hardness: >91.5 Hra;
Length: 50~500mm;
Surface Finishing: H6 Tolerance;
Grain Sizes Selection: Ultra Fine, Fine, Medium, Coarse;
Cobalt Percentage: From 3% to 30% Based on Different Grades;
Wc+Co Powder: 100% Virgin Material;
|